The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to identify precisely the source of the failure. With this article, we will discover how to replace the electric window regulator of a jeep wrangler . But before seeing the procedure to follow, you must be sure to know where the failure came from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes be enough. Whether it's a false contact, or just a lack of lubrication. Now that you are sure of the origin of the problem, let us return to our subject.
Replacing a Jeep Wrangler window regulator: how to do it
It takes a long time to change a window regulator. Depending on your experience in the field, plan about three hours to make sure you don't get caught up in time. Whether for a jeep wrangler or another vehicle, this repair is for experienced DIY enthusiasts. So let's look at what to do, step by step. It is advisable to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a jeep wrangler
- Remove the entire door trim. From the mirror cover to the handle. This should be done rather gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This step is the longest to complete.
- Remove the window regulator seals from your jeep wrangler. Again, it is wiser to do it carefully.
- Now that you have access to the window regulator, disconnect the connectors. You must then release the window lifter motor if it is stuck.
- Remove all the fasteners that hold the glass, then take it out. It is sometimes better to position the window halfway up to be able to carry out this manipulation. Of course we will have to be extremely careful when moving the glass. It is advisable to put it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is wiser to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.
The installation of an electric window regulator of a jeep wrangler
- Fit the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably have to use the fasteners that you removed.
- Replace the glass just as you removed it. It will sometimes be necessary to rotate it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals you removed.
- Reassemble the door trim assembly.
It's done, you now have a new and functional window regulator . So you have to turn on your car and test it.