The advantage of an electric window regulator is huge compared to manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not necessarily easy to identify precisely the source of the failure. In this article we will see how to replace the electric window regulator on a Nissan Interstar Combi . But before you can see what to do, you need to be sure you know where the fault is coming from. Let's be clear, sometimes it is unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it concerns a false contact, or quite simply a lack of lubrication. Now that you've identified the source of the dysfunction, let's get to the heart of the matter.
Nissan Interstar Combi window regulator replacement: how to do it
Replacing a window regulator is relatively time-consuming. Depending on your experience in the field, count about three hours to make sure you don't get caught up in the weather. Whether for a Nissan Interstar Combi or on another car, this manipulation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take pictures in several steps to help you fit the new window regulator.
Removing a window regulator on a Nissan Interstar Combi
- Remove all of the door trim. From the handle to the retro cover. This operation must be done relatively carefully using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the window regulator gaskets from your Nissan Interstar Combi. Again, it is essential to go about it with care.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is stuck.
- Release all the fasteners that hold the glass, then remove the latter. It is sometimes more advisable to place the glass halfway up to perform this operation. Of course, you will have to be extremely careful when moving the window. It is advisable to place it on a rather thick sheet.
- Remove the window regulator completely. It is essential to remember your location. You can take a picture of it if it can help you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.
Installing an electric window for a Nissan Interstar Combi
- Present the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably need to use the fasteners you removed.
- Replace the glass as you removed it. Sometimes it will be necessary to move it slightly so that it fits properly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's good, you now have a new and working window regulator . So you can turn on your car and test it.