The interest of an electric window regulator is consequent compared to the manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the exact cause of the failure. With this article we will find out How to repair the electric window of a Smart Crossblade . But before you can see what to do, you need to be sure you know where the failure is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will often work. Whether it concerns a false contact, or quite simply a lack of lubrication. Now that you've identified the source of the concern, let's get back to our topic.
How to replace a Smart Crossblade window regulator
Replacing a window regulator is rather tedious. Depending on your experience in the field, count about two o'clock to make sure you have the time you need. Whether for a Smart Crossblade or on another car, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. It is advisable to take pictures at different times in order to help you reassemble the new window regulator.
Removing a window regulator on a Smart Crossblade
- Remove all of the door trim. From the handle to the retro cover. This manipulation should be done rather carefully using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This step is quite long to perform.
- Remove the gaskets from the window regulator of your Smart Crossblade. Again, it's important to go about it with care.
- Now that you have access to the window regulator, remove the connectors. You must then disengage the motor from the window regulator in case it is stuck.
- Remove all the fasteners that hold the glass in place, then remove the glass. It is sometimes preferable to place the window halfway up to be able to carry out this manipulation. Of course, you have to be very careful when moving the window. It is best to put it on a sufficiently thick sheet.
- Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so they will have to be removed.
The installation of an electric window of a Smart Crossblade
- Present the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the fasteners you removed.
- Reposition the glass just as you removed it. It will sometimes be necessary to move it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Replace the door trim assembly.
That's it, you now have a new and functional window regulator . So you have to put the ignition on and test it.