The clutch has a rather long life. It necessarily varies according to the different types of car, but we say that we can do about 100 000 km without changing it. It's even conceivable to take your grand cherokee jeep to its limits. The state of clutch wear is automatically linked to the owner's driving. In order to understand the concern related to your clutch , it's important to know how it works. And then we will see how to properly perform a check and what methods you can apply.
How a clutch works on a grand cherokee jeep
The clutch will make a connection between the engine block and your wheels. When you are driving in neutral, the engine block no longer has any interaction with the wheels, which is obvious. It is located between the engine block and the gearbox. The clutch disc is located between the flywheel on one side, and a diaphragm and pressure plate on the other side. The diaphragm will add flexibility when disengaging. This is what makes that there is no metallic snap. When the clutch is engaged, all of these components separate and the engine block therefore spins in a vacuum.
jeep grand cherokee: The main clutch concerns
The pedal of your jeep grand cherokee is hard
Most of the time, the clutch cable is frayed. It can also come from the clutch springs. In the first case it is conceivable to replace only the cable. For the other, your auto repairer will advise you to replace the clutch kit complete, which is more reasonable.
The clutch of your jeep grand cherokee is slipping
If you ever accelerate, the engine block goes up in revs but your jeep grand cherokee is heavy, it's conceivable that the clutch is slipping. Power losses are not necessarily linked to a clutch problem. If you ever have a lack of power, a hard pedal or a binding clutch at the same time, this is undoubtedly a skating . Do not delay in going to an auto repairer if this is what happens. This kind of worry can cause even more serious worries.
jeep grand cherokee: The gears shift badly
It happens that it is only a problem of gearbox. But since this is inevitably linked to the clutch, it is better to be careful. That it concerns only one of the two, it is rather expensive. It is better to replace only one of the two. In order to diagnose the problem, it is better to see if the clutch is damaged. If the problem comes from the gearbox, it is advisable to drain oil. You can go to a mechanic if the problem does not go away, the after-effects can be quite serious.
Checking a jeep grand cherokee clutch
There is a way to tell if the clutch is working properly. You will have to start the engine in 3rd or 4th gear, and slowly disengage. If ever your vehicle does not stall or stalls rather late, the clutch is undoubtedly defective. However, the opposite does not mean that it is in good condition. Leave a comment if this file was useful. Enjoy the road!