The clutch has a fairly long service life. This inevitably varies depending on the car model, however it is said that we could drive around 100 000 km without replacing it. It is even likely to pull your smart forfour until its last days. The condition of the clutch is directly related to the use of the driver. In order to assimilate the dysfunction related to this clutch , it is essential to know how it works. Then we will see how to carry out a check and what procedures can be applied.
How a clutch works on a smart forfour
The clutch will make sure to make a junction between the engine block and your wheels. When you are driving in neutral, the engine block no longer interacts with the wheels, which you are aware of. It is located between the engine block and the gearbox. The clutch disc is located between the flywheel on one side, and a diaphragm and pressure plate on the other hand. The diaphragm gives the opportunity to bring malleability to the clutch. That's why we don't feel any mechanical tweak. When the clutch is pressed, all these constituents separate and the engine block consequently turns empty.
smart forfour: The main clutch malfunctions
The pedal of your smart forfour is hard
Most of the time, it is related to the clutch cable which is damaged. It could also come from the clutch springs. In the first case it remains likely to simply change the cable. In the second, your auto repairer will recommend that you change the clutch kit complete, which makes more sense.
Your smart forfour's clutch is slipping
In the event that you accelerate, that the engine block goes up in speed but that your smart forfour is struggling to accelerate, it is likely that its clutch is slipping. Power losses are not necessarily related to a clutch malfunction. In the event that there is at the same time loss of power, a hard pedal or a difficult clutch, it is certainly a skating . Do not delay in going to an auto repairer in case this is happening. This kind of malfunction will sometimes cause much more serious malfunctions.
smart forfour: Gears go wrong
It may just be a gearbox malfunction. But since the latter is inevitably linked to the clutch, it's better to stay attentive. That it concerns only one of the two is quite expensive. Better to change only one of the two. Thus, if you wish to recognize the malfunction, it is better to check if the clutch is damaged. If the malfunction comes from the gearbox, we advise you to drain oil. Do not hesitate to go to a professional in case the dysfunction does not disappear, the consequences can be quite serious.
Checking a smart forfour clutch
There is a procedure to understand if your clutch is working properly. You will have to start in third or fourth, then disengage little by little. In the event that your vehicle does not stall or stalls quite late, it is because the clutch is defective for sure. However, the opposite does not mean that it is in perfect condition. Leave a comment in case this folder helped you. See you soon!