Using working flashing lights remains a legal requirement. As a reminder, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although some law enforcement officers are occasionally lenient on this subject. It is therefore essential to have flashing lights in good condition. We will see below how to replace the bulb of a turn signal for a Citroen Nemo Combi, front and rear. It is sometimes likely that the problem comes from a short circuit, however it remains rather exceptional.change-flashing-Citroen-Nemo-Combi

Citroen Nemo Combi: things to know before replacing its indicator

First of all, it is essential to properly select your type of bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to a garage which can order them for you. Then you will have to be careful to select the right color for your bulb. Finally, you will need a tools extremely simple but still necessary. You will therefore need a screwdriver for a Citroen Nemo Combi. A kit of cruciform and torx and you will necessarily be able to get there. In most cases, the bulbs are at bayonet . To dismantle the damaged bulb, the bulb must be turned a quarter of a turn to the left. In order to fix the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Citroen Nemo Combi

There are two main ways to access the flashing lights. It depends on the different models, however access can be done either from the outside or from the inside on your Citroen Nemo Combi. Access from inside the engine : Initially, it will be necessary to open the hood. Then, you will have to loosen the cover using a screwdriver (usually torx) to access the light block. As soon as the block is unscrewed, remove it and it is possible to replace your bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. If this is correct, you will have to disassemble the hooks and remove the screws using a screwdriver. Then remove the light block of your Citroen Nemo Combi gently from the front. Now you just have to replace your bulb and put the light block back in the opposite direction. Exceptionally, on some models it remains likely to remove the block of lights from the outside. Nevertheless it is rather rare. If ever this is right, using a screwdriver you will need to disassemble the fixings, slowly release the light block and change your burnt out bulb.

How to change the bulb of a rear indicator on a Citroen Nemo Combi

There are also two main ways to access this turn signal bulb. It can depend on the ranges however the access can be done either inside or outside. Access from inside the trunk : Most of the time access can be done from the trunk. Regarding the light units, there are screws and fixings. Remove them and remove the block, being careful. Finally you will simply have to change your burnt out bulb with the new one. Then repeat the same manipulation in reverse. It is also likely that access can be from the outside or under the wheel arch. However, it is much rarer. In all cases, you will need to take your screwdrivers and carefully remove the entire headlight assembly so as to replace this bulb. To reassemble, do the opposite manipulation.