Using working indicators remains a legal obligation. As a reminder, omitting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Even if certain police officers are sometimes accommodating on this subject. It therefore remains important to have indicators working properly. We will see with this article how to change the bulb of a Citroen Nemo turn signal, at the front and rear. It is also likely that the malfunction comes from a short circuit, however it is rather exceptional.
Citroen Nemo: things to know before changing your turn signal
Firstly it is important to correctly choose the type of bulb! So as not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who will be able to select them. Secondly, be careful to choose the right color of the bulb. Thereafter, you will need to use a tools very basic but still essential. You will need a screwdriver for a Citroen Nemo. A kit of cruciform and torx and you will necessarily be able to get there. Most of the time, the bulbs are at bayonet . In order to remove the faulty bulb you will have to turn the bulb a quarter of a turn to the left. In order to install the new bulb, it is therefore necessary to turn a quarter turn in the opposite direction.
How to change the bulb of a front indicator on a Citroen Nemo
There are two different ways to access the flashing lights. It depends on the models, however access will be either from the outside or from the inside for a Citroen Nemo. Access from inside the engine : First of all, you will have to open the hood. Then, you must loosen the cover with the help of a screwdriver (usually torx) in order to access the headlight unit. When the unit is unclipped, remove it and do not hesitate to change your bulb. Wheel arch access : Look below the wheel to see if the clips are there. When this happens, it is necessary to disassemble the fixings and remove the screws using a screwdriver. Secondly remove the headlight unit from this Citroen Nemo slowly from the front. You just need to change the bulb and put the block back in the opposite direction. Less frequently, for some models it is likely to remove the headlight unit from the outside. However, it is rather rare. When this is happening, with the help of a screwdriver you will need to remove the fixings, remove the headlight unit quietly and replace the defective bulb.
How to change the bulb of a rear indicator on a Citroen Nemo
There are also two different ways to access your turn signal bulb. It may depend on the different types, however access will be either from the inside or from the outside. Access from inside the trunk : Most of the time access will be through the interior of the trunk. At the level of the light blocks, there are screws and fixings. Remove them and drop the block slowly. Then you only need to replace your defective bulb with a new one. Then repeat this operation in the other direction. It also remains likely that access can be from the outside or under the wheel arch. However, it is much rarer. In all cases, it is necessary to bring your screwdrivers and gently remove the entire headlight unit so as to change your bulb. To reassemble, perform the opposite manipulation.