Using working flashing lights is mandatory. Remember, not putting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some police officers are regularly accommodating on this subject. It is therefore important to have flashing lights that work properly. We will now find out how to replace the bulb of a Citroen Revolte indicator, front and rear. It is also likely that the concern comes from a false contact, however it is quite exceptional.
Citroen Revolte: things to know before replacing your turn signal
To start with it is wiser to choose the right type of bulb! So as not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who will be able to order them for you. In a second step you will have to think about choosing the right color for your bulb. Finally, you will need a tools super basic but still essential. You will therefore need a screwdriver for a Citroen Revolte. A cruciform and torx kit and everything will be doable. In most cases, the bulbs are at bayonet . In order to remove the damaged bulb you will have to rotate it by a quarter of a turn anticlockwise. So to fix the new bulb, you will therefore have to rotate a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Citroen Revolte
There are two main solutions to access the turn signals. It depends on the models, however access will be done either from the outside or from the inside on your Citroen Revolte. Access from inside the engine : First, you will need to open the hood. Then, it is necessary to loosen the cover using a screwdriver (most often torx) in order to access the headlight unit. When the unit is unclipped, remove it and it is possible to replace your bulb. Wheel arch access : Check underneath the wheel to see if the clips are there. When that's right, you will have to undo the fixings and remove the screws with the help of your screwdriver. Then remove the headlight block of this Citroen Revolte gently from the front. It is now enough to replace the bulb and put the light block in the other direction. Exceptionally, on some cars it remains likely to replace the headlight unit from the outside. But it is quite rare. When that is right, using a screwdriver, you will have to remove the fixings, remove the headlight unit quietly and replace the burnt out bulb.
How to change the bulb of a rear indicator on a Citroen Revolte
There are also two main solutions to access your turn signal bulb. It can depend on the ranges however the access will be done either inside or outside. Access from inside the trunk : Almost every time access will be from the trunk. Regarding the headlight blocks, you will find screws and fixings. Remove them and remove the block slowly. To finish it is necessary to just replace your burnt out bulb with the new one. Then repeat the same manipulation in reverse. It is also likely that access is from the outside or through the wheel arch. But it is much less frequent. Whatever happens, you will have to bring your screwdrivers and gently remove the whole light block so as to replace this bulb. To put it in place, perform the reverse manipulation.