Having indicators that are in good condition remains an obligation of the law. As a reminder, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some police officers are indulgent from time to time on this subject. It is thus important to have indicators which function correctly. We will see below how to replace the bulb of a Citroen Saxo Vts flashing light, front and rear. It is also conceivable that the concern comes from a false contact, however it is quite rare.change-flashing-Citroen-Saxo-Vts

Citroen Saxo Vts: things to know before replacing your turn signal

At first it is essential to correctly select your type of bulb! So as not to be mistaken, it is advisable to go to a spare parts site or to your car repairer who can select them. Then you have to think about choosing the right color for the bulb. Thereafter, you will need a tools extremely basic but nevertheless necessary. You will therefore need a screwdriver for a Citroen Saxo Vts. A cruciform and torx kit and nothing can happen to you. Generally, the bulbs are at bayonet . To remove the defective bulb you will have to turn it a quarter of a turn to the left. So to install the new bulb, it is therefore necessary to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Citroen Saxo Vts

There are two different solutions to access the turn signals. It depends on the models, however access will be either from the outside or from the inside for your Citroen Saxo Vts. Access from inside the engine : First, you will need to open the hood. And then you need to remove a cover with a screwdriver (most often torx) in order to access the headlight unit. Now that the block is unclipped, remove it and you can replace your bulb. Wheel arch access : Check under the wheel to see if the clips are there. When this is right, you must disassemble the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit from this Citroen Saxo Vts gently from the front. You simply need to replace the bulb and reattach the block following the reverse procedure. Exceptionally, for certain cars it is conceivable to remove the headlight unit from the outside. Nevertheless it is quite rare. When that's right, with a screwdriver you will need to remove the fasteners, gently remove the headlight assembly and change the failed bulb.

How to change the bulb of a rear indicator on a Citroen Saxo Vts

There are also two different solutions to access this turn signal bulb. It depends on the models but access will be either from inside or outside. Access from inside the trunk : Most of the time access will be through the interior of the trunk. At the headlight blocks, there are screws and fasteners. Remove them and remove the block slowly. Thereafter you only have to change your faulty bulb with a new one. And then repeat the same manipulation in reverse. It is also conceivable that access can be from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you must use your screwdriver and gently remove the entire light unit in order to replace this bulb. To reassemble, do the opposite manipulation.