Having turn signals that are in good condition remains mandatory. Remember, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if some police officers are occasionally complacent about this. It is therefore essential to have indicators in good working order. We will now find out how to replace the bulb of a turn signal for a Citroen Spacetourer, front and rear. It is sometimes likely that the concern comes from a false contact, however it remains relatively exceptional.change-flashing-Citroen-Spacetourer

Citroen Spacetourer: things to know before replacing its indicator

First it is essential to correctly select your type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a professional who will be able to select them. Thereafter you will have to be careful to choose the right color for the bulb. Then you will need a tools super simple but still necessary. You will therefore need a screwdriver for a Citroen Spacetourer. A kit of cruciform and torx and you will necessarily be able to get there. In most cases, the bulbs are at bayonet . In order to dismantle the broken bulb, you will have to turn it a quarter of a turn to the left. In order to install the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Citroen Spacetourer

There are two main solutions for accessing the flashing lights. Indeed, it depends on the different models, however access will be either from the outside or from the inside on your Citroen Spacetourer. Access from inside the engine : First, you will need to open your hood. And then, you will have to remove the cover using a screwdriver (most often torx) in order to access the headlight unit. Now that the block is unclipped, remove it and do not hesitate to replace the bulb. Wheel arch access : Look under the wheel to see if the fixings are there. If so, you will need to remove the fasteners and remove the screws with a screwdriver. Then remove the headlight block from your Citroen Spacetourer gently from the front. You just need to replace the bulb and put the light block back in the opposite direction. Less frequently, on some cars it is likely to remove the headlight unit from the outside. However, it is relatively rare. If this is the case, using a screwdriver you will need to remove the fixings, gently release the headlight unit and replace the burnt out bulb.

How to change the bulb of a rear indicator on a Citroen Spacetourer

There are also two main solutions to access this turn signal bulb. It depends on the models, however access will be either from the inside or from the outside. Access from inside the trunk : In most of the cases the access will be done inside the trunk. For these light blocks, you will find screws and fixings. Remove them and slowly remove the block. Then you will only have to replace the burnt out bulb with a new one. And then repeat the same manipulation in reverse. It is also likely that access is from the outside or under the wheel arch. However, it is much rarer. Whatever happens, you will need to use your screwdriver and carefully remove the entire light unit in order to replace your bulb. To put it in place, do the opposite manipulation.