Using working flashing lights remains a legal requirement. As a reminder, omitting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some police officers are sometimes accommodating on this subject. It therefore remains essential to have flashing lights in good working order. We will now see how to change the bulb of a indicator of a Citroen Visa, front and rear. It is sometimes likely that the malfunction comes from a short circuit, but it remains quite rare.change-flashing-Citroen-Visa

Citroen Visa: things to know before changing your turn signal

To start it is essential to correctly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your car repairer who can select them. In a second step you will have to think about choosing the right color for your bulb. Then you will need to use a tools extremely simple but still essential. You will therefore need a screwdriver for a Citroen Visa. A cruciform and torx kit and everything will be doable. Most of the time, the bulbs are at bayonet . In order to dismantle the faulty bulb, it must be rotated a quarter of a turn to the left. In order to install the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Citroen Visa

There are two different solutions to access the flashing lights. It depends on the models, but the accessibility will be either from the outside or from the inside for a Citroen Visa. Access from inside the engine : First, you will need to open your hood. Then, you must remove a cover with the help of a screwdriver (frequently torx) in order to access the headlight unit. When the unit is unclipped, remove it and you can change the bulb. Wheel arch access : Check under the wheel to see if the clips are there. In case this is happening, you will have to undo the fasteners and remove the screws with a screwdriver. Then remove the headlight block of this Citroen Visa gently from the front. You just need to change your bulb and reattach the block the other way. More rarely, for some models it remains likely to remove the headlight unit from the outside. But it is quite rare. In case this is happening, with the help of a screwdriver you will have to remove the fasteners, release the headlight unit slowly and change your defective bulb.

How to change the bulb of a rear indicator on a Citroen Visa

We can also find two different solutions to access your turn signal bulb. It can depend on the ranges, however the accessibility will be done either inside or outside. Access from inside the trunk : In most of the cases the accessibility will be done inside the trunk. For these light blocks, there are screws and fasteners. Remove them and remove the block, being careful. Then you simply have to replace the defective bulb with a new one. Then repeat the same manipulation in the other direction. It also remains likely that accessibility can be from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will need to use your screwdriver and carefully remove the entire block of lights in order to change the bulb. To set it up, take the opposite step.