Having working indicators is compulsory. As a reminder, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some law enforcement officials are sympathetic to this point from time to time. It is thus necessary to have indicators in good condition. We will find out with this article how to replace the bulb of a flashing light for a Hyundai I-blue, front and rear. It is also possible that the concern comes from a short circuit, however it is rather exceptional.
Hyundai I-blue: things to know before replacing your turn signal
First of all it is important to correctly select your type of bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to a mechanic who can order them for you. Then it is necessary to be careful to choose the right color for your bulb. Finally, you will need to use a tools very simple but nevertheless essential. You will therefore need a screwdriver for a Hyundai I-blue. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . In order to remove the faulty bulb, it must be rotated a quarter of a turn to the left. In order to put the new bulb, you will therefore have to rotate a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Hyundai I-blue
There are two main ways to access the turn signals. It depends on the different models, however access will be either from the outside or from the inside for a Hyundai I-blue. Access from inside the engine : First of all, you have to open the hood. Then, you will have to loosen a cover using a screwdriver (frequently torx) to access the headlight unit. Now that the block is unscrewed, remove it and do not hesitate to replace this bulb. Wheel arch access : Check underneath the wheel to see if the fasteners are there. When this is happening, you will have to undo the fixings and remove the screws with a screwdriver. Then remove the headlight unit from this Hyundai I-blue slowly from the front. You just need to replace your bulb and position the light block following the reverse procedure. Less frequently, for some cars it is possible to remove the headlight unit from the outside. But it is rather rare. When this is happening, using a screwdriver you will need to remove the fasteners, remove the headlight unit slowly and change your burnt out bulb.
How to change the bulb of a rear indicator on a Hyundai I-blue
There are also two main ways to access the turn signal bulb. It depends on the different types but access will be either from inside or outside. Access from inside the trunk : In most of the cases access will be from the safe. For these light blocks, there are screws and fasteners. Take them off and take the piece out slowly. Finally you will simply have to change this burnt out bulb with a new one. Then repeat this operation in the other direction. It is also possible that access can be from the outside or under the wheel arch. But it is much less frequent. Whatever happens, you will have to take out your screwdriver and carefully remove the entire headlight assembly in order to replace this bulb. To reassemble, take the opposite step.