Having working indicators is a legal requirement. Think about it, omitting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are lenient at times on this subject. It therefore remains essential to have indicators in good working order. We will see with this article how to change the bulb of a turn signal for a Hyundai I-mode, front and rear. It is also possible that the malfunction is due to a short circuit, however it is rather rare.
Hyundai I-mode: things to know before changing your turn signal
Above all it is important to correctly buy the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts website or to a car repairer who knows how to select them. Then you will have to be careful to select the right color of the bulb. Then you will need a tools very basic but nevertheless essential. You will therefore need a screwdriver for a Hyundai I-mode. A kit of cruciform and torx and you will necessarily be able to get there. Generally, the bulbs are at bayonet . In order to remove the faulty bulb, you must turn it a quarter of a turn to the left. In order to install the new bulb, you will have to turn it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Hyundai I-mode
There are two main ways to access the flashing lights. Indeed, it depends on the models, however accessibility can be done either from the outside or from the inside on a Hyundai I-mode. Access from inside the engine : To start, you will need to open the hood. And then, you have to unscrew the cover using a screwdriver (most often torx) to access the headlight unit. Now that the unit is unclipped, remove it and it is possible to change this bulb. Wheel arch access : Check underneath the wheel to see if the fixings are there. When this is the case, you will need to remove the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit from this Hyundai I-mode gently from the front. It is now enough to change your bulb and position the block in the opposite direction. Less frequently, on some cars it is still possible to remove the headlight unit from the outside. But it is rather rare. When this is the case, using a screwdriver you will have to remove the fixings, gently remove the headlight unit and replace your burnt out bulb.
How to change the bulb of a rear indicator on a Hyundai I-mode
There are also two main ways to access your turn signal bulb. It can depend on the different types, however accessibility can be done either from inside or outside. Access from inside the trunk : Almost every time accessibility can be done from the trunk. Regarding the light units, there are screws and fixings. Take them off and take the piece out slowly. Then only replace this burnt out bulb with the new one. And then repeat this operation in the other direction. It also remains possible that accessibility can be from the outside or through the wheel arch. But it is much less frequent. In all cases, you will need to use your screwdriver and gently remove the entire headlight assembly so as to change the bulb. To put it in place, carry out the opposite manipulation.