Having functioning turn signals remains mandatory. Remember, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if some police officers are from time to time benevolent on this point. It is therefore essential to have indicators that work correctly. We will see with this article how to replace the bulb of a turn signal for a hyundai i10, front and rear. It is sometimes possible that the concern comes from a short circuit, however this remains relatively exceptional.change-flashing-Hyundai-i10

Hyundai i10: things to know before replacing your turn signal

First of all, it is essential to properly choose the type of bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who can order them for you. Then you have to be careful to select the right color for your bulb. Finally, you will need to use a tools extremely basic but still essential. You will therefore mainly need a screwdriver for a hyundai i10. A set of cruciforms and torxes and everything will be doable. Almost every time, the bulbs are bayonet . To be able to remove the defective bulb you will have to turn the bulb a quarter of a turn counterclockwise. To fix the new bulb, you must then rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a hyundai i10

There are two main solutions for achieving turn signals. It depends on the different models, however accessibility will be either from the outside or from the inside for this hyundai i10. Access from inside the engine : First of all, you will have to open the hood. Then, you will have to remove a cover using a screwdriver (often torx) to access the light unit. When the block is unclipped, remove it and you can replace this bulb. Wheel arch access : Inspect underneath the wheel to see if the fasteners are there. In case this is what happens, you have to disassemble the fixings and remove the screws with a screwdriver. Then remove the light unit of your hyundai i10 slowly from the front. You just have to replace your bulb and put the block back in the opposite direction. Less frequently, for some models it is still possible to remove the light unit from the outside. But it is relatively rare. If this is what happens, using a screwdriver you will have to remove the fasteners, remove the light unit slowly and replace your burnt out bulb.

How to change the bulb of a rear indicator on a hyundai i10

There are also two main solutions for accessing the turn signal bulb. This may depend on the different types however accessibility will be either from the inside or from the outside. Access from inside the trunk : Generally accessibility will be from the trunk. For these headlight blocks you will find screws and fasteners. Remove them and drop the block, being careful. Finally, you just have to replace this burnt out bulb with the new one. Then repeat the same manipulation in the other direction. It is also possible that the accessibility can be from the outside or through the wheel arch. But it is much rarer. Whatever happens, you must use your screwdrivers and gently remove the entire headlight assembly in order to replace this bulb. To put it in place, do the opposite.