Having working flashing lights remains a legal requirement. As a reminder, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some police officers are indulgent from time to time on this subject. It is therefore essential to have flashing lights in good condition. We will now see how to replace the bulb of a turn signal for a hyundai i30, front and rear. It is also possible that the concern is the result of a false contact, however this remains rather exceptional.
Hyundai i30: things to know before replacing your turn signal
Firstly it is essential to correctly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a garage which can select them. In the second step, you will have to think about selecting the right color for your bulb. Then you will need to use a tools extremely simple but still necessary. You will need a screwdriver for a hyundai i30. A cruciform and torx kit and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to dismantle the faulty bulb it will be necessary to rotate the bulb a quarter of a turn anticlockwise. In order to put the new bulb, you will have to rotate a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a hyundai i30
There are two different ways to access the turn signals. It depends on the different models, however access can be done either from the outside or from the inside for your hyundai i30. Access from inside the engine : First of all, you will have to open your hood. And then, remove the cover with a screwdriver (usually torx) to access the headlight unit. When the block is unscrewed, remove it and you can replace the bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. When this is happening, you will need to disassemble the fixings and remove the screws with a screwdriver. In the second step, carefully remove the headlight assembly from your hyundai i30 from the front. Now you just have to replace your bulb and reattach the block by following the reverse procedure. Less frequently, for certain cars it is possible to remove the headlight unit from the outside. Nevertheless it is rather rare. When this is happening, with a screwdriver you will need to remove the fasteners, gently remove the headlight unit and replace your defective bulb.
How to change the bulb of a rear indicator on a hyundai i30
There are also two different ways to access this turn signal bulb. It can depend on the different types, however access can be done either from the inside or from the outside. Access from inside the trunk : Frequently access can be done from inside the trunk. Regarding the headlight blocks, there are screws and fasteners. Take them out and remove the part, being careful. Then only replace the defective bulb with a new one. And then repeat this operation in reverse. It is also possible that access is from the outside or under the wheel arch. However, it is much less frequent. Whatever happens, you will have to bring your screwdrivers and gently remove the entire headlight assembly so as to replace your bulb. To put it in place, take the opposite step.