Use of working flashing lights remains compulsory. Remember, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if some police officers are sometimes lenient on this subject. It is therefore essential to have flashing lights that work properly. We will therefore discover with this article how to replace the bulb of a indicator of a hyundai i40, at the front and the rear. It is sometimes likely that the malfunction comes from a short circuit, however it remains relatively rare.change-flashing-Hyundai-i40

Hyundai i40: things to know before replacing your turn signal

At first it is essential to correctly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a garage that knows how to select them. Second, remember to choose the right color for your bulb. Thereafter, you will need to use a tools very basic but nonetheless essential. You will therefore mainly need a screwdriver for a Hyundai i40. A kit of cruciform and torx and you will necessarily be able to get there. Generally, the bulbs are at bayonet . In order to dismantle the broken bulb, the bulb must be turned a quarter of a turn anticlockwise. In order to install the new bulb, you will therefore have to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a hyundai i40

There are two different solutions to access the flashing lights. Indeed, it depends on the different models, however accessibility can be done either from the outside or from the inside on this hyundai i40. Access from inside the engine : First of all, you will have to open the hood. And then, it is necessary to remove the cover using a screwdriver (most often torx) in order to access the headlight unit. Once the block is unscrewed, remove it and do not hesitate to replace this bulb. Wheel arch access : Check under the wheel to see if the fixings are there. When this is happening, you will need to remove the fasteners and remove the screws using a screwdriver. Secondly remove the headlight unit from your hyundai i40 slowly from the front. Now just replace your bulb and reattach the block of lights following the reverse procedure. Less frequently, on some models it is likely to replace the headlight unit from the outside. However, it is relatively rare. When this is happening, using a screwdriver you will need to remove the fasteners, gently release the headlight unit and change your failed bulb.

How to change the bulb of a rear indicator on a hyundai i40

We can also find two different solutions to access your turn signal bulb. It can depend on the models, however accessibility can be done either from inside or outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. Regarding the headlight blocks, there are screws and fasteners. Take them off and take the piece off, being careful. Thereafter it is necessary to just change this faulty bulb with the new one. And then repeat the same manipulation in the other direction. It is also likely that accessibility can be from the outside or through the wheel arch. However, it is much less frequent. In all cases, you will need to take your screwdrivers and gently remove the entire light unit so as to replace the bulb. To put it in place, proceed to the reverse manipulation.