Using working flashing lights is a legal requirement. Think about it, not putting a flashing light is punishable by 3 point on the permit as well as a fine . Even if some law enforcement officers are occasionally sympathetic to this point. It is therefore essential to have flashing lights in good condition. We will now find out how to replace the bulb of a flashing light for a Hyundai Ix-onic, front and rear. It is sometimes conceivable that the problem comes from a false contact, nevertheless it is relatively rare.change-flashing-Hyundai-Ix-onic

Hyundai Ix-onic: things to know before replacing your turn signal

First it is important to correctly choose the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your mechanic who knows how to select them. In a second step you will have to be careful to select the right color of the bulb. Thereafter, you will need a tools extremely simple but still essential. You will need a screwdriver for a Hyundai Ix-onic. A cruciform and torx kit and everything will be doable. Almost every time, the bulbs are bayonet . To dismantle the faulty bulb, you must rotate the bulb a quarter of a turn anticlockwise. In order to put the new bulb, you will therefore have to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Hyundai Ix-onic

There are two main ways to access the flashing lights. It depends on the models, however access can be done either from the outside or from the inside on your Hyundai Ix-onic. Access from inside the engine : First, you will need to open your hood. Then, you must remove the cover with a screwdriver (most often torx) in order to access the light block. When the block is unscrewed, remove it and it is possible to replace your bulb. Wheel arch access : Look below the wheel to see if the fixings are there. When this is happening, you will have to remove the hooks and remove the screws with the help of your screwdriver. Then remove the light unit from your Hyundai Ix-onic slowly from the front. You just need to replace the bulb and position the block in the opposite direction. Exceptionally, on some cars it is conceivable to remove the block of lights from the outside. But it is relatively rare. When this is happening, with a screwdriver you will have to dismantle the fixings, remove the light block quietly and change the defective bulb.

How to change the bulb of a rear indicator on a Hyundai Ix-onic

There are also two main ways to access your turn signal bulb. It can depend on the ranges however the access can be done either inside or outside. Access from inside the trunk : Almost every time access can be done from the trunk. Regarding the headlight blocks, there are screws and fixings. Remove them and remove the block gently. Thereafter you only need to change your defective bulb with a new one. Then repeat this operation in the other direction. It is also conceivable that access is from the outside or under the wheel arch. But it is much rarer. Whatever happens, you will have to take your screwdriver and carefully remove the entire headlight assembly so as to replace this bulb. To put it in place, perform the reverse manipulation.