Use of indicators which are in good condition remains compulsory. Think about it, omitting a flashing light is punishable by 3 point on the permit as well as a fine . Although some law enforcement officials are regularly complacent on this point. It therefore remains important to have indicators working properly. We will now see how to change the bulb of a Hyundai Ix20 indicator, front and rear. It is also likely that the concern is the result of a false contact, but it remains quite rare.change-flashing-Hyundai-Ix20

Hyundai Ix20: things to know before changing your turn signal

First of all it is wiser to correctly buy the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to your garage which can select them. Second, be careful to select the right color for the bulb. Thereafter, you will need a tools extremely simple but still necessary. You will therefore need a screwdriver for a Hyundai Ix20. A cruciform and torx game and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to remove the defective bulb it will be necessary to rotate the bulb a quarter of a turn anticlockwise. To install the new bulb, it is therefore necessary to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Hyundai Ix20

There are two different ways to get to the turn signals. It depends on the different models, but accessibility can be done either outside or inside on this Hyundai Ix20. Access from inside the engine : First, you will need to open the hood. And then, you will have to unscrew the cover using a screwdriver (often torx) in order to access the light block. Once the block is unscrewed, remove it and you can change your bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. If this is what happens, it is necessary to undo the fixings and remove the screws with the help of your screwdriver. Second remove the block of lights of the Hyundai Ix20 gently from the front. Now you just have to change the bulb and put the light block back in the reverse order. More rarely, on some models it is likely to remove the light block from the outside. However it is quite rare. If this is what happens, using a screwdriver you will have to remove the fixings, release the light block quietly and replace the defective bulb.

How to change the bulb of a rear indicator on a Hyundai Ix20

There are also two different ways to access this turn signal bulb. It can depend on the different types, however accessibility can be done either from inside or outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. Regarding the headlight blocks, you will find screws and fixings. Remove them and lay the piece down slowly. Thereafter you will simply have to replace your defective bulb with the new one. And then repeat this operation in reverse. It also remains likely that accessibility can be from the outside or through the wheel arch. However, it is much rarer. In all cases, it is necessary to take your screwdriver and remove, being careful, the entire headlight unit in order to change the bulb. To reassemble, perform the opposite manipulation.