Having working flashing lights is mandatory. Remember, not putting a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Even if certain police officers are sometimes sympathetic on this subject. It therefore remains important to have flashing lights that work properly. We will find out below how to replace the bulb of a indicator of a Hyundai Ix55, front and rear. It is sometimes conceivable that the dysfunction results from a false contact, however it is relatively exceptional.change-flashing-Hyundai-Ix55

Hyundai Ix55: things to know before replacing your turn signal

Firstly it is important to buy the right type of bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to an auto repairer who can order them for you. In a second step it will be necessary to think of selecting the right color of the bulb. Finally, you will need a tools very basic but still essential. You will need a screwdriver for a Hyundai Ix55. A game of cruciform and torx and everything will be doable. In most cases, the bulbs are at bayonet . To remove the faulty bulb, you must turn it a quarter of a turn to the left. In order to fix the new bulb, you will therefore have to turn a quarter turn in the opposite direction.

How to change the bulb of a front indicator on a Hyundai Ix55

There are two main ways to access the flashing lights. Indeed, it depends on the different models, however access can be done either from the outside or from the inside on your Hyundai Ix55. Access from inside the engine : First, you will need to open the hood. And then you need to loosen a cover using a screwdriver (most often torx) to access the headlight assembly. When the unit is unclipped, remove it and do not hesitate to replace your bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If this is the case, you will have to remove the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit from this Hyundai Ix55 slowly from the front. It is now enough to replace the bulb and replace the block in the opposite direction. Exceptionally, on some cars it is conceivable to remove the headlight unit from the outside. However, it is relatively rare. If this is the case, using a screwdriver you will have to remove the fasteners, gently release the headlight unit and replace the faulty bulb.

How to change the bulb of a rear indicator on a Hyundai Ix55

There are also two main ways to access your turn signal bulb. It depends on the ranges, however access can be done either from the inside or from the outside. Access from inside the trunk : Most of the time access can be done from inside the trunk. For these light blocks, there are screws and fasteners. Remove them and remove the block slowly. Finally you simply have to replace your faulty bulb with a new one. And then repeat the same manipulation in reverse. It also remains conceivable that access can be from the outside or under the wheel arch. However, it is much rarer. Whatever happens, you will have to use your screwdriver and carefully remove the entire light unit to replace the bulb. To put it in place, proceed to the opposite step.