Using direction indicators that are in good condition remains a legal obligation. Remember, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if some law enforcement officers are indulgent from time to time on this subject. It therefore remains necessary to have indicators in good working order. So we will see in this article how to change the bulb of a Hyundai Kona turn signal, at the front and rear. It is sometimes possible that the problem comes from a short circuit, but it is rather exceptional.change-flashing-Hyundai-Kona

Hyundai Kona: things to know before changing your turn signal

At first it is important to correctly buy the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to an auto repairer who will be able to order them for you. Then you have to think about choosing the right color for the bulb. Finally, you will need to use a tools super simple but nonetheless essential. You will therefore need a screwdriver for a Hyundai Kona. A game of cruciform and torx and you will be able to do it. Almost every time, the bulbs are bayonet . In order to remove the damaged bulb, you will have to turn the bulb a quarter of a turn anticlockwise. To install the new bulb, you will have to turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Hyundai Kona

There are two main solutions in order to access the indicators. It depends on the different models, but access will be either from the outside or from the inside for your Hyundai Kona. Access from inside the engine : First, open your hood. Then, you will have to unscrew a cover with a screwdriver (frequently torx) in order to access the headlight unit. Now that the block is unscrewed, remove it and do not hesitate to change this bulb. Wheel arch access : Check underneath the wheel to see if the clips are there. If this is the case, you will have to remove the hooks and remove the screws using a screwdriver. Then remove the headlight unit from your Hyundai Kona gently from the front. It is now enough to change your bulb and position the block of lights following the opposite approach. Exceptionally, for some cars it is still possible to remove the headlight unit from the outside. Nevertheless it is rather rare. If ever this is the case, with a screwdriver you will have to remove the fasteners, release the headlight block quietly and replace your defective bulb.

How to change the bulb of a rear indicator on a Hyundai Kona

There are also two main solutions to access this turn signal bulb. It depends on the different types, however access will be either from the inside or from the outside. Access from inside the trunk : Frequently access will be from inside the trunk. For these headlight blocks, there are screws and fasteners. Remove them and gently remove the block. Finally you will just have to replace this defective bulb with the new one. Then repeat the same manipulation in the other direction. It also remains possible that access can be from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to use your screwdriver and gently remove the entire block of lights in order to change your bulb. To put it in place, proceed to the reverse manipulation.