Having working flashing lights is a legal requirement. As a reminder, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some police officers are occasionally lenient on this point. It is therefore essential to have flashing lights that work properly. We will therefore find out below how to replace the bulb of a turn signal for a hyundai lantra, front and rear. It is also conceivable that the concern comes from a false contact, nevertheless it remains rather rare.change-flashing-hyundai-lantra

hyundai lantra: things to know before replacing your turn signal

Firstly it is essential to properly select the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to a mechanic who can select them. Secondly you will have to think about choosing the right color for your bulb. Thereafter, you will need a tools extremely simple but still necessary. You will therefore need a screwdriver for a hyundai lantra. A cruciform and torx game and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to remove the faulty bulb, it must be rotated a quarter of a turn to the left. In order to put the new bulb, it is therefore necessary to rotate a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a hyundai lantra

There are two main ways to access the turn signals. It depends on the models, however access will be either from the outside or from the inside on this hyundai lantra. Access from inside the engine : First, you will have to open the hood. Then, it is necessary to remove a cover with a screwdriver (often torx) to access the block of lights. When the block is unscrewed, remove the block and you can replace this bulb. Wheel arch access : Inspect under the wheel to see if the fasteners are there. When it is well that, it is necessary to disassemble the hooks and remove the screws with the help of your screwdriver. Second remove the block of lights from the hyundai lantra gently from the front. Now just replace the bulb and reattach the block the other way. Exceptionally, on some cars it is conceivable to remove the block of lights from the outside. But it is rather rare. When it is well that, with a screwdriver you will have to disassemble the fixings, remove the block of lights gently and replace the burned out bulb.

How to change the bulb of a rear indicator on a hyundai lantra

There are also two main ways to access your turn signal bulb. It depends on the different types, however access will be either from the inside or from the outside. Access from inside the trunk : Almost every time access will be from the trunk. At the headlight blocks, you will find screws and fixings. Remove them and remove the part, being careful. Subsequently it is necessary to simply replace this burnt out bulb with the new one. Then repeat the same manipulation in reverse. It is also conceivable that access can be from the outside or through the wheel arch. But it is much less frequent. Whatever happens, you need to bring your screwdrivers and carefully remove the entire headlight unit so as to replace this bulb. To set it up, take the opposite approach.