Using working indicators is mandatory. Think about it, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if some police officers are indulgent from time to time on this point. It therefore remains essential to have indicators in good condition. We will see in this article how to change the bulb of a flashing light of hyundai matrix, at the front and rear. It is also likely that the concern comes from a false contact, however it is quite rare.change-flashing-hyundai-matrix

Hyundai matrix: things to know before changing your turn signal

Above all it is important to correctly buy your type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to a professional who can order them for you. Then you will have to be careful to choose the right color for your bulb. Thereafter, you will need a tools super simple but still necessary. You will need a screwdriver for a hyundai matrix. A game of cruciform and torx and everything will be doable. Almost every time, the bulbs are bayonet . To remove the defective bulb you will have to rotate the bulb a quarter of a turn to the left. In order to put the new bulb, it is necessary to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a hyundai matrix

There are two main ways to access the flashing lights. It depends on the different models, however accessibility can be done either from the outside or from the inside on this hyundai matrix. Access from inside the engine : First, open your hood. Then, you will need to remove the cover with a screwdriver (usually a torx) to access the light block. Once the block is unscrewed, remove it and you can change your bulb. Wheel arch access : Check underneath the wheel to see if the fixings are there. When this is right, it is necessary to remove the fasteners and remove the screws with the help of your screwdriver. Then remove the light block from this hyundai matrix delicately from the front. You just need to change the bulb and replace the block following the reverse procedure. Less frequently, on some models it is likely to replace the light block from the outside. But it is quite rare. When that's right, with a screwdriver you will need to remove the fasteners, remove the light block slowly and change the faulty bulb.

How to change the bulb of a rear indicator on a hyundai matrix

There are also two main ways to access the turn signal bulb. It can depend on the different types, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Generally accessibility can be done inside the trunk. Regarding the light blocks, there are screws and fasteners. Remove them and lay the piece down slowly. Thereafter it will just be necessary to change your defective bulb by the new one. Then repeat this operation in the other direction. It also remains likely that accessibility is done from the outside or through the wheel arch. But it is much less frequent. In all cases, it is necessary to bring your screwdrivers and remove, paying careful attention to the entire headlight unit in order to change the bulb. To reassemble, do the opposite manipulation.