Having flashing lights that are in good condition remains an obligation of the law. As a reminder, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although some police officers are at times complacent about this. It is therefore important to have flashing lights that work properly. We will therefore discover with this article how to change the bulb of a turn signal for a Hyundai Neos 2, at the front and the rear. It is also likely that the problem stems from a bad contact, however this is still rather exceptional.change-turn signal-Hyundai-Neos-2

Hyundai Neos 2: things to know before changing your turn signal

To begin with, it is important to choose the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your auto repairer who can order them for you. Secondly, you have to be careful to select the right color for the bulb. Then you will need a tools very simple but nevertheless essential. You will therefore need a screwdriver for a Hyundai Neos 2. A set of cruciforms and torxes and everything will be doable. Most of the time, the bulbs are bayonet . In order to take out the broken bulb, you will have to turn it a quarter of a turn counterclockwise. In order to fix the new bulb, it is necessary to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front turn signal on a Hyundai Neos 2

We can find two different solutions to access the flashing lights. Indeed, it depends on the different models, however access can be done either from the outside or from the inside on this Hyundai Neos 2. Access from inside the engine : First, you will have to open the cover. Then, it is necessary to remove a cover with a screwdriver (regularly torx) in order to access the headlight block. When the block is unclipped, remove it and the bulb can be changed. Wheel arch access : Inspect the underside of the wheel to see if the fasteners are there. If that's it, you have to disassemble the hooks and remove the screws with a screwdriver. Secondly remove the headlight assembly of this Hyundai Neos 2 slowly from the front. Now all you have to do is change the bulb and put the unit back in the opposite direction. Exceptionally, on some cars it is still likely to remove the headlight unit from the outside. However, it is rather rare. If that's it, with a screwdriver you will have to remove the fixings, remove the headlight unit slowly and change the defective bulb.

How to change the bulb of a rear indicator on a Hyundai Neos 2

We can also find two different solutions to access this indicator bulb. It may depend on the different types however the access can be done either from inside or from outside. Access from inside the trunk : Most of the time, access can be done from inside the boot. Regarding the headlight blocks, you will find screws and fixings. Take them out and remove the part being careful. Then it is necessary to simply change the defective bulb with the new one. Then repeat this operation in the other direction. It is also likely that the access could be from the outside or under the wheel arch. However, it is much less common. Whatever happens, you must use your screwdrivers and remove, being careful, the entire headlight unit in order to change your bulb. To reassemble it, follow the opposite procedure.