Having working flashing lights remains a legal requirement. Remember, omitting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Even if a few police officers are sometimes complacent about this. It is thus necessary to have flashing lights in good working order. We will see below how to change the bulb of a flashing light for a Hyundai Neos, front and rear. It is also likely that the malfunction came from a short circuit, but it is quite rare.
Hyundai Neos: things to know before changing your turn signal
Firstly it is important to properly buy the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to a mechanic who will be able to select them. In the second step, you will have to think about choosing the right color for the bulb. Thereafter, you will need to use a tools super basic but still essential. You will therefore mainly need a screwdriver for a Hyundai Neos. A cruciform and torx kit and everything will be doable. Almost every time, the bulbs are bayonet . So to take out the defective bulb you will have to turn it a quarter of a turn to the left. To install the new bulb, it is necessary to turn a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Hyundai Neos
There are two main ways to access the flashing lights. It depends on the models, but accessibility can be done either outside or inside for this Hyundai Neos. Access from inside the engine : First of all, you will have to open the hood. Then, it will be necessary to loosen the cover with a screwdriver (frequently torx) to access the block of lights. As soon as the unit is unclipped, remove it and it is possible to change this bulb. Wheel arch access : Inspect under the wheel to see if the clips are there. When this is the case, it is necessary to undo the fixings and remove the screws with the help of your screwdriver. Then remove the light block of this Hyundai Neos carefully from the front. Now you just have to change your bulb and put the block back in the opposite direction. Exceptionally, for some cars it is likely to replace the block of lights from the outside. But it is quite rare. When this is the case, with a screwdriver you will have to dismantle the fasteners, remove the light block quietly and replace your faulty bulb.
How to change the bulb of a rear indicator on a Hyundai Neos
There are also two main ways to access this turn signal bulb. It can depend on the different types but accessibility can be done either from inside or outside. Access from inside the trunk : Generally accessibility can be done from the trunk. For these light blocks, there are screws and fasteners. Take them out and remove the part, being careful. Thereafter it will simply replace this faulty bulb with the new one. Then repeat the same manipulation in reverse. It is also likely that accessibility is from the outside or through the wheel arch. But it is much less frequent. Whatever happens, it is necessary to use your screwdriver and remove, being careful, the entire headlight unit so as to change this bulb. To reassemble, do the opposite manipulation.