Having working indicators remains mandatory. Remember, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if some law enforcement officers are sympathetic to this matter at times. It therefore remains essential to have indicators in good working order. We will therefore see with this article how to change the bulb of a flashing light for Hyundai Olv, front and rear. It is also conceivable that the dysfunction comes from a false contact, nevertheless it remains relatively exceptional.
Hyundai Olv: things to know before changing your turn signal
Firstly it is important to buy the right type of bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to your mechanic who can select them. Then you will have to be careful to select the right color for your bulb. Thereafter, you will need a tools very simple but still essential. You will therefore need a screwdriver for a Hyundai Olv. A cruciform and torx kit and nothing can happen to you. Almost every time, the bulbs are bayonet . To dismantle the faulty bulb you will have to turn the bulb a quarter of a turn anticlockwise. In order to install the new bulb, you will have to turn it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Hyundai Olv
There are two different ways to access the turn signals. Indeed, it depends on the models, however access can be done either from the outside or from the inside for your Hyundai Olv. Access from inside the engine : First, you will need to open the hood. Then, remove a cover using a screwdriver (often torx) to access the light block. Now that the block is unscrewed, remove it and it is possible to change this bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. If this is correct, you will have to disassemble the hooks and remove the screws with the help of your screwdriver. Then remove the light block of this Hyundai Olv gently from the front. You simply have to change the bulb and put the block back the other way. More rarely, for some models it is conceivable to remove the block of lights from the outside. However, it is relatively rare. If that's right, using a screwdriver you will need to remove the fasteners, gently remove the light unit and change the burnt out bulb.
How to change the bulb of a rear indicator on a Hyundai Olv
There are also two different ways to access this turn signal bulb. It depends on the models but access can be done either from inside or outside. Access from inside the trunk : Most of the time access can be done from inside the trunk. At the light blocks, you will find screws and fasteners. Remove them and remove the part slowly. Then you simply have to change this burnt out bulb with a new one. Then repeat this operation in the other direction. It also remains conceivable that access can be from the outside or under the wheel arch. However, it is much less frequent. In all cases, you will need to bring your screwdrivers and remove the entire block of lights, being careful so as to change this bulb. To put it in place, do the opposite.