Having working indicators is a legal requirement. As a reminder, omitting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some law enforcement officers are regularly lenient on this subject. It is therefore essential to have indicators that work correctly. We will therefore discover with this article how to replace the bulb of a turn signal on a hyundai santa fe, front and rear. It is also likely that the malfunction comes from a short circuit, however it is rather rare.change-flashing-hyundai-santa-fe

hyundai santa fe: things to know before replacing your indicator

First of all, it is essential to correctly buy the type of bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to your professional who can order them for you. Second, you have to be careful to select the right color for your bulb. Then you will need to use a tools extremely simple but nevertheless essential. You will therefore need a screwdriver for a hyundai santa fe. A set of cruciforms and torxes and nothing can happen to you. Almost every time, the bulbs are bayonet . To remove the defective bulb you will have to turn it a quarter of a turn to the left. To put in the new bulb, it will be necessary to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a hyundai santa fe

There are two main ways to reach the turn signals. It depends on the model, however access can be done either from the outside or from the inside on your hyundai santa fe. Access from inside the engine : First, you will have to open your hood. Then, you will have to remove the cover using a screwdriver (often torx) to access the light unit. As soon as the block is unscrewed, remove it and do not hesitate to replace the bulb. Wheel arch access : Inspect the underside of the wheel to see if the fasteners are there. When this is correct, you will have to dismantle the hooks and remove the screws with the help of your screwdriver. Secondly, remove the light unit from your hyundai santa fe slowly from the front. All you have to do is replace the bulb and position the light unit in the reverse order. Less frequently, on some cars it is still likely to remove the light unit from the outside. However, it is rather rare. When that's it, using a screwdriver you will have to remove the fixings, remove the light unit slowly and replace the burnt bulb.

How to change the bulb of a rear indicator on a hyundai santa fe

There are also two main ways to access your turn signal bulb. It depends on the ranges but access can be done either from inside or from outside. Access from inside the trunk : In most cases, access can be done from inside the boot. For these light blocks there are screws and fixings. Take them out and gently remove the coin. Then you will only have to replace the burnt out bulb with the new one. Then repeat this operation in reverse order. It is also likely that the access is from the outside or under the wheel arch. However, it is much less frequent. In all cases, you will have to use your screwdrivers and carefully remove the entire headlight unit in order to replace your bulb. To put it in place, reverse the process.