Using working indicators is a legal requirement. Remember, not putting a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Although a few police officers are regularly sympathetic to this. It therefore remains essential to have indicators in good condition. So we will see in this article how to replace the bulb of a indicator of Hyundai Satellite, front and rear. It is also conceivable that the malfunction comes from a short circuit, but it is rather exceptional.change-flashing-Hyundai-Satellite

Hyundai Satellite: things to know before replacing your turn signal

To start it is essential to buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts website or to an auto repairer who can select them. Secondly you will have to think about selecting the right color for your bulb. Finally, you will need a tools super simple but still necessary. You will therefore mainly need a screwdriver for a Hyundai Satellite. A game of cruciform and torx and you will be able to do it. Most of the time, the bulbs are at bayonet . To dismantle the defective bulb you will have to rotate it a quarter of a turn to the left. To put the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Hyundai Satellite

There are two different ways to get to the turn signals. Indeed, it depends on the models, but accessibility can be done either from the outside or from the inside on your Hyundai Satellite. Access from inside the engine : First, you will have to open the hood. Then, you must remove a cover using a screwdriver (regularly torx) to access the light block. When the unit is unclipped, remove it and you can replace the bulb. Wheel arch access : Inspect underneath the wheel to see if the clips are there. When that's right, you will need to remove the fasteners and remove the screws with the help of your screwdriver. Secondly, carefully remove the light unit from your Hyundai Satellite from the front. You just need to replace your bulb and replace the block following the reverse procedure. Less frequently, on some models it is conceivable to remove the block of lights from the outside. Nevertheless it is rather rare. When it is well that, using a screwdriver you will have to remove the fixings, remove the block of lights quietly and change your faulty bulb.

How to change the bulb of a rear indicator on a Hyundai Satellite

There are also two different ways to access this turn signal bulb. It can depend on the different types but accessibility can be done either from inside or outside. Access from inside the trunk : Generally accessibility can be done inside the trunk. At the headlight blocks, there are screws and fasteners. Remove them and remove the block, being careful. Finally you just have to replace the faulty bulb with the new one. Then repeat the same manipulation in reverse. It also remains conceivable that accessibility can be from the outside or under the undertray. However, it is much less frequent. Whatever happens, you will need to take out your screwdriver and gently remove the entire headlight assembly in order to replace this bulb. To reassemble, proceed to the opposite step.