Using working flashing lights is mandatory. As a reminder, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although some law enforcement officials are sometimes sympathetic on this point. It is therefore essential to have flashing lights in good condition. We will therefore see below how to replace the bulb of a Hyundai Scoupe indicator, front and rear. It is also conceivable that the concern comes from a short circuit, but it remains relatively exceptional.
Hyundai Scoupe: things to know before replacing your turn signal
Firstly, it is essential to choose the right bulb type! So as not to be mistaken, it is advisable to go to a spare parts website or to a garage which can order them for you. Thereafter it will be necessary to pay attention to select the good color of the bulb. Thereafter, you will need to use a tools extremely simple but still necessary. You will therefore mainly need a screwdriver for a Hyundai Scoupe. A game of cruciform and torx and everything will be doable. Most of the time, the bulbs are at bayonet . In order to be able to dismantle the faulty bulb, you must rotate it by a quarter of a turn to the left. In order to put the new bulb, you will have to rotate a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Hyundai Scoupe
There are two main solutions to achieve the indicators. Indeed, it depends on the different models, but accessibility will be either outside or inside for your Hyundai Scoupe. Access from inside the engine : First of all, you will have to open your hood. And then, you must unscrew a cover using a screwdriver (regularly torx) to access the light block. As soon as the block is unscrewed, remove it and you can replace this bulb. Wheel arch access : Inspect under the wheel to see if the fasteners are there. If so, you will need to remove the fasteners and remove the screws with the help of your screwdriver. Then carefully remove the light unit from your Hyundai Scoupe from the front. Now just replace the bulb and position the block in the opposite direction. Less frequently, for certain cars it is conceivable to remove the block of lights from the outside. But it is relatively rare. If this is the case, using a screwdriver you will need to remove the fasteners, gently remove the light block and change the failed bulb.
How to change the bulb of a rear indicator on a Hyundai Scoupe
There are also two main solutions for accessing this turn signal bulb. It depends on the models but the accessibility will be done either inside or outside. Access from inside the trunk : In most of the cases the accessibility will be done inside the trunk. Regarding the headlight blocks, you will find screws and fasteners. Remove them and remove the part, being careful. Then you just have to change this faulty bulb with the new one. And then repeat the same manipulation in the other direction. It is also conceivable that accessibility is done from the outside or through the wheel arch. But it is much less frequent. In all cases, you will need to use your screwdriver and gently remove the entire light unit in order to replace the bulb. To reassemble, perform the reverse manipulation.