Using working flashing lights remains a legal requirement. Remember, forgetting to put a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are sometimes sympathetic on this point. It is therefore important to have flashing lights that work properly. We will find out with this article how to change the bulb of a flashing light for a Hyundai Sonata, front and rear. It is also likely that the concern comes from a short circuit, however it remains quite exceptional.
Hyundai Sonata: things to know before changing your turn signal
Above all it is important to correctly choose the type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a mechanic who can order them for you. In the second step, you will have to think about selecting the right color for your bulb. Then you will need a tools super simple but still essential. You will therefore need a screwdriver for a Hyundai Sonata. A kit of cruciform and torx and you will necessarily be able to get there. Almost every time, the bulbs are bayonet . In order to dismantle the defective bulb you will have to turn the bulb a quarter of a turn to the left. So to install the new bulb, it will actually turn a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a hyundai sonata
There are two main ways to access the flashing lights. Indeed, it depends on the models, however access will be either from the outside or from the inside for your hyundai sonata. Access from inside the engine : First of all, you will have to open the hood. And then, you have to unscrew the cover using a screwdriver (often torx) in order to access the light block. As soon as the unit is unclipped, remove it and do not hesitate to change your bulb. Wheel arch access : Inspect underneath the wheel to see if the clips are there. In case this is happening, you will have to remove the fasteners and remove the screws with a screwdriver. Then remove the light block from the Hyundai Sonata gently from the front. Now just change your bulb and reattach the light block in reverse. Exceptionally, for some models it is likely to replace the light block from the outside. But it is quite rare. In the event that this is happening, using a screwdriver you will need to remove the fixings, remove the light block quietly and replace your defective bulb.
How to change the bulb of a rear indicator on a hyundai sonata
There are also two main ways to access your turn signal bulb. It can depend on the ranges nevertheless the access will be done either inside or outside. Access from inside the trunk : Most of the time access will be from the trunk. For these headlight blocks, there are screws and fixings. Remove them and remove the block, being careful. Then you only need to replace your defective bulb with a new one. And then repeat this operation in reverse. It is also likely that access is from the outside or under the wheel arch. But it is much rarer. In all cases, you will need to bring your screwdrivers and carefully remove the entire light unit so as to change the bulb. To put it in place, proceed to the reverse manipulation.