Having flashing lights that are in good condition remains an obligation of the law. Think about it, not putting a flashing light is liable to 3 point on the permit as well as a fine . Even if certain police officers are sometimes lenient on this point. It is therefore important to have flashing lights in good working order. We will now see how to change the bulb of a indicator of a Hyundai Terracan, at the front and the rear. It is sometimes conceivable that the problem comes from a short circuit, but that remains rather exceptional.
Hyundai Terracan: things to know before changing your turn signal
First of all it is wiser to correctly select the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your car repairer who can order them for you. Then you have to think about selecting the right color for the bulb. Then you will need to use a tools very simple but still essential. You will need a screwdriver for a Hyundai Terracan. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . In order to take out the broken bulb you will have to turn the bulb a quarter of a turn anticlockwise. To install the new bulb, it will therefore be necessary to rotate a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a hyundai terracan
There are two different ways to access the flashing lights. It depends on the models, but accessibility can be done either from the outside or from the inside for this hyundai terracan. Access from inside the engine : First, you will need to open your hood. Then, you must remove a cover with the help of a screwdriver (regularly torx) in order to access the headlight unit. Now that the block is unclipped, remove it and do not hesitate to change this bulb. Wheel arch access : Check under the wheel to see if the clips are there. If this is happening, you will have to undo the fasteners and remove the screws with the help of your screwdriver. In the second step, carefully remove the headlight unit from your hyundai terracan from the front. You simply need to change the bulb and position the block in the other direction. Exceptionally, for some cars it is conceivable to remove the headlight unit from the outside. Nevertheless it is rather rare. If this is what is happening, with the help of a screwdriver you will have to remove the fasteners, remove the headlight unit slowly and replace the faulty bulb.
How to change the bulb of a rear indicator on a hyundai terracan
There are also two different ways to access this turn signal bulb. It can depend on the different types, however accessibility can be done either from inside or outside. Access from inside the trunk : Most of the time accessibility can be done from the trunk. At the headlight blocks, there are screws and fasteners. Take them out and put the piece down, being careful. Then you simply have to replace this faulty bulb with a new one. Then repeat the same manipulation in the other direction. It is also conceivable that accessibility is done from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will need to bring your screwdrivers and gently remove the entire headlight unit so as to change your bulb. To put it in place, proceed to the opposite manipulation.