Using working flashing lights is mandatory. Think about it, omitting a flashing light is liable to 3 point on the permit as well as a fine . Even if certain agents of the law are sometimes accommodating on this point. It is thus necessary to have flashing lights which function correctly. We will therefore see in this article how to replace the bulb of a flashing light for a hyundai route, at the front and rear. It is also possible that the problem originated from a short circuit, but it is relatively rare.change-flashing-hyundai-ride

Hyundai ride: things to know before replacing your turn signal

First of all, it is essential to choose the right bulb model! So as not to be mistaken, we advise you to go to a spare parts website or to your garage who knows how to order them for you. In the second step, it is necessary to be careful to select the right color for your bulb. Finally, you will need to use a tools super simple but nevertheless essential. You will therefore mainly need a screwdriver for a hyundai journey. A game of cruciform and torx and you will be able to do it. In most cases, the bulbs are at bayonet . In order to take out the defective bulb, it will have to be turned a quarter of a turn anticlockwise. In order to install the new bulb, you will then have to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Hyundai route

There are two different solutions for accessing the indicators. Indeed, it depends on the models, but accessibility can be done either from the outside or from the inside for this hyundai journey. Access from inside the engine : First of all, you have to open your hood. Then, it is necessary to loosen the cover using a screwdriver (often torx) to access the headlight unit. Now that the block is unscrewed, remove it and you can replace the bulb. Wheel arch access : Check underneath the wheel to see if the fixings are there. If that's right, you will need to undo the fixings and remove the screws with the help of your screwdriver. Then remove the headlight block from the hyundai gently travel from the front. Now just replace your bulb and position the block the other way. Exceptionally, for some cars it is possible to remove the headlight unit from the outside. However, it is relatively rare. If that's right, using a screwdriver you will need to disassemble the fasteners, gently remove the headlight assembly and replace your failed bulb.

How to change the bulb of a rear indicator on a hyundai route

There are also two different solutions for accessing this turn signal bulb. It can depend on the models but accessibility can be done either from inside or outside. Access from inside the trunk : Frequently accessibility can be done from inside the trunk. Regarding the light blocks, there are screws and fasteners. Remove them and remove the block, being careful. Finally it is necessary to simply replace the faulty bulb with the new one. Then repeat this operation in reverse. It is also possible that accessibility can be from outside or under the wheel arch. However, it is much rarer. In all cases, you will need to take your screwdrivers and gently remove the entire headlight assembly in order to replace this bulb. To reassemble, reverse the procedure.