Having working indicators remains an obligation of the law. Remember, not putting a flashing light is punishable by 3 point on the permit as well as a fine . Even if some police officers are sometimes kind on this point. It therefore remains essential to have indicators in good condition. We will see with this article how to replace the bulb of a flashing light of a Hyundai Veloster, at the front and rear. It is sometimes possible that the problem comes from a short circuit, but this remains relatively exceptional.
Hyundai Veloster: things to know before replacing your turn signal
At first it is essential to properly select the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to a garage which can select them. Second, you will have to be careful to choose the right color for the bulb. Thereafter, you will need to use a tools super simple but nevertheless necessary. You will therefore need a screwdriver for a Hyundai Veloster. A kit of cruciform and torx and you will necessarily be able to get there. Most of the time, the bulbs are at bayonet . In order to dismantle the broken bulb, you must rotate it by a quarter of a turn anticlockwise. To install the new bulb, it will be necessary to rotate a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Hyundai Veloster
There are two different ways to access the turn signals. Indeed, it depends on the models, but accessibility will be either outside or inside for a Hyundai Veloster. Access from inside the engine : First, you will need to open the hood. And then, you must remove the cover with the help of a screwdriver (often torx) to access the headlight unit. When the unit is unclipped, remove it and it is possible to replace the bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. When this is right, you will have to undo the hooks and remove the screws with a screwdriver. Secondly remove the headlight unit from this Hyundai Veloster gently from the front. It is now enough to replace the bulb and reattach the block of lights following the reverse procedure. Less frequently, for some cars it is possible to remove the headlight unit from the outside. But it is relatively rare. When it is well that, with the help of a screwdriver it will be necessary to remove the fixings, to release the block of headlight quietly and to change the defective bulb.
How to change the bulb of a rear indicator on a Hyundai Veloster
There are also two different ways to access this turn signal bulb. It depends on the different types, however the accessibility will be either from the inside or the outside. Access from inside the trunk : Most of the time accessibility will be through the interior of the trunk. Regarding the light units, there are screws and fixings. Remove them and remove the piece gently. Subsequently it is only necessary to replace the faulty bulb with a new one. And then repeat this operation in reverse. It also remains possible that accessibility is from outside or under the wheel arch. But it is much rarer. In all cases, you will need to take your screwdriver and remove, taking care, the entire block of lights so as to replace this bulb. To set it up, take the opposite approach.