Having working indicators is a legal requirement. Remember, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if some police officers are lenient at times on this subject. It is therefore essential to have indicators in good condition. We will therefore find out below how to replace the bulb of a flashing light for a Jeep Willys, at the front and rear. It is sometimes possible that the concern is the result of a false contact, but this remains rather exceptional.change-flashing-Jeep-Willys

Jeep Willys: things to know before replacing your turn signal

To start with it is essential to buy the model of your light bulb! In order not to be mistaken, we advise you to go to a spare parts website or to a garage which will be able to order them for you. Second, remember to choose the right color for the bulb. Finally, you will need to use a tools very simple but still necessary. You will need a screwdriver for a Jeep Willys. A game of cruciform and torx and you will be able to do it. Almost every time, the bulbs are bayonet . In order to remove the faulty bulb it will be necessary to rotate the bulb a quarter of a turn anti-clockwise. In order to install the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Willys Jeep

There are two different ways to get to the flashing lights. It depends on the different models, but access can be done either from the outside or from the inside on a Jeep Willys. Access from inside the engine : First of all, you will have to open the hood. Then, it is necessary to remove a cover with the help of a screwdriver (often torx) in order to access the headlight unit. Once the unit is unclipped, remove it and do not hesitate to replace the bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If this is the case, you will have to disassemble the clips and remove the screws using a screwdriver. Secondly remove the headlight unit from this Jeep Willys gently from the front. Now just replace your bulb and reattach the block in reverse. More rarely, on some cars it is possible to replace the headlight unit from the outside. But it is rather rare. If this is the case, with the help of a screwdriver you will need to remove the fixings, gently remove the headlight unit and change your burnt out bulb.

How to change the bulb of a rear indicator on a Willys Jeep

There are also two different ways to access your turn signal bulb. It can depend on the ranges nevertheless the access can be done either inside or outside. Access from inside the trunk : Generally access can be done from the trunk. At the headlight blocks, there are screws and fasteners. Remove them and lay the piece gently. To finish it is necessary to simply change the burnt out bulb with a new one. Then repeat this operation in reverse. It is also possible that access can be from the outside or through the wheel arch. But it is much less frequent. In all cases, you will need to bring your screwdriver and gently remove the entire light unit so as to replace this bulb. To set it up, take the opposite step.