Having working indicators remains a legal requirement. Think about it, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although a few law enforcement officers are sympathetic to this point from time to time. It is therefore essential to have the turn signals in good working order. We are now going to find out how to change the bulb of a turn signal light on a Kia Cee D 2, at the front and the rear. It is sometimes probable that the dysfunction is the result of a false contact, but this remains relatively exceptional.change-turn signal-Kia-Cee-D-2

Kia Cee D 2: things to know before changing your indicator

To begin with, it is wiser to properly buy your type of bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your professional who can select them. Second, you have to think about selecting the right color for your bulb. Then you will need to use a tools super simple but still essential. You will therefore need a screwdriver for a Kia Cee D 2. A set of cruciforms and torxes and everything will be doable. Usually the bulbs are at bayonet . To take out the faulty bulb you need to turn the bulb a quarter of a turn counterclockwise. In order to fit the new bulb, you will therefore have to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Kia Cee D 2

There are two different ways to access the flashing lights. It depends on the different models, but accessibility will be either from the outside or from the inside on this Kia Cee D 2. Access from inside the engine : First of all, you will have to open your hood. And then you have to remove a cover with the help of a screwdriver (frequently torx) to access the headlight assembly. When the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Check underneath the wheel to see if the fasteners are there. If that's it, you will have to undo the hooks and remove the screws with the help of your screwdriver. Secondly, remove the headlight unit from your Kia Cee D 2 gently from the front. You simply need to change the bulb and position the block in the other direction. Exceptionally, on some models it is likely to remove the headlight unit from the outside. However, it is relatively rare. If this is correct, with the help of a screwdriver you will have to remove the fasteners, remove the headlight assembly slowly and change the faulty bulb.

How to change the bulb of a rear indicator on a Kia Cee D 2

There are also two different ways to access your turn signal bulb. It depends on the ranges, however the accessibility will be either from the inside or from the outside. Access from inside the trunk : Frequently accessibility will be from the trunk. Regarding the light blocks, you will find screws and fasteners. Remove them and remove the block being careful. Then you simply have to change your faulty bulb with a new one. And then repeat this operation in reverse order. It remains more likely that the accessibility could be from the outside or under the wheel arch. However, it is much less common. In any case, you will have to bring your screwdrivers and carefully remove the entire headlight unit in order to change your bulb. To reassemble it, reverse the procedure.