Using flashing lights which are in good condition remains compulsory. As a reminder, forgetting to put a flashing light is liable to 3 point on the permit as well as a traffic ticket . Although some law enforcement officials are sympathetic to this matter at times. It is therefore necessary to have flashing lights in good working order. We will therefore discover in this article how to replace the bulb of a turn signal of a Kia Cee D, at the front and rear. It is also possible that the malfunction comes from a false contact, however it is relatively exceptional.change-flashing-Kia-Cee-D

Kia Cee D: things to know before replacing your turn signal

To start with it is essential to choose the right type of bulb! So as not to be mistaken, it is advisable to go to a spare parts site or to your garage who knows how to select them. Secondly you will have to be careful to select the right color for your bulb. Then you will need to use a tools very basic but nevertheless essential. You will therefore need a screwdriver for a Kia Cee D. A set of cruciforms and torx and you will be able to do it. Generally, the bulbs are at bayonet . In order to dismantle the damaged bulb it will be necessary to rotate the bulb a quarter of a turn to the left. In order to fix the new bulb, it will therefore be necessary to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Kia Cee D

There are two main solutions for accessing the flashing lights. Indeed, it depends on the models, however access can be done either from the outside or from the inside on a Kia Cee D. Access from inside the engine : First, you will need to open your hood. Then, you must loosen a cover using a screwdriver (usually torx) in order to access the light block. When the block is unscrewed, remove it and you can replace the bulb. Wheel arch access : Look below the wheel to see if the clips are there. In this case, you will have to undo the fixings and remove the screws using a screwdriver. Second, carefully remove the light block from the Kia Cee D from the front. You simply need to replace your bulb and reattach the block in the opposite direction. More rarely, on some models it is possible to replace the light block from the outside. But it is relatively rare. In this case, using a screwdriver you will need to remove the fixings, remove the light unit slowly and replace your faulty bulb.

How to change the bulb of a rear indicator on a Kia Cee D

There are also two main solutions for accessing your turn signal bulb. It can depend on the ranges, however access can be done either from the inside or from the outside. Access from inside the trunk : Generally access can be done from the safe. For these headlight blocks, you will find screws and fixings. Remove them and take the piece off slowly. Then just replace the faulty bulb with a new one. Then repeat this operation in the other direction. It is also possible that access is from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will need to bring your screwdrivers and gently remove the entire headlight unit in order to replace the bulb. To put it in place, proceed to the opposite manipulation.