Having flashing lights that work remains mandatory. Remember, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some law enforcement officers are sometimes complacent about this. It is therefore important to have the flashing lights in good condition. So now we will see how to replace the bulb of a Kia Clarus indicator light, front and rear. It's also conceivable that the concern stems from a bad contact, but it's quite exceptional.change-turn signal-Kia-Clarus

Kia Clarus: things to know before replacing your indicator

First of all, it is essential to correctly select the type of bulb! So as not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who will be able to select them. Then it is necessary to think about selecting the right color for your bulb. Subsequently, you will need to use a tools extremely simple but nevertheless essential. So you will mainly need a screwdriver for a Kia Clarus. A set of cruciforms and torxes and everything will be doable. Most of the time, the bulbs are bayonet . In order to remove the broken bulb, you will have to turn it a quarter of a turn to the left. In order to fix the new bulb, it is then necessary to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Kia Clarus

There are two different ways to access the flashing lights. Indeed, it depends on the different models, but accessibility can be done either from the outside or from the inside on a Kia Clarus. Access from inside the engine : To begin with, you will need to open the hood. Then, you will have to unscrew a cover with the help of a screwdriver (regularly torx) to access the headlight block. Now that the block is unscrewed, remove it and it is possible to replace this bulb. Wheel arch access : Look below the wheel to see if the clips are there. When this is the case, it is necessary to undo the fasteners and remove the screws with a screwdriver. Subsequently remove the headlight unit of this Kia Clarus delicately from the front. Now all you have to do is replace your bulb and put the unit back in the opposite direction. More rarely, on some cars it is conceivable to remove the headlight unit from the outside. But it is quite rare. When this is the case, with the help of a screwdriver it will be necessary to dismantle the fixings, remove the headlight unit quietly and change your faulty bulb.

How to change the bulb of a rear indicator on a Kia Clarus

There are also two different ways to access this turn signal bulb. It depends on the models, however, accessibility can be done either from the inside or from the outside. Access from inside the trunk : Almost every time the accessibility can be done from the trunk. For these light blocks you will find screws and fixings. Take them out and gently pull the part out. Subsequently, it will simply be necessary to change this faulty bulb with the new one. Then repeat this operation in the other direction. It is also conceivable that accessibility is from the outside or through the wheel arch. But it is much rarer. Whatever happens, it is necessary to use your screwdrivers and carefully remove the entire headlight unit in order to replace your bulb. To reassemble it, perform the opposite procedure.