Having turn signals that are in good condition is mandatory. Remember, not putting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some police officers are sometimes sympathetic on this point. It therefore remains essential to have indicators working properly. We will see with this article how to replace the bulb of a flashing light of a Kia Pride, front and rear. It is also conceivable that the malfunction comes from a short circuit, however it is quite exceptional.change-flashing-Kia-Pride

Kia Pride: things to know before replacing your turn signal

To start it is essential to choose the right bulb model! In order not to be mistaken, it is advisable to go to a spare parts site or to your garage which will be able to order them for you. Secondly you will have to be careful to choose the right color of the bulb. Then you will need to use a tools super simple but still necessary. You will therefore mainly need a screwdriver for a Kia Pride. A cruciform and torx kit and nothing can happen to you. Generally, the bulbs are at bayonet . To dismantle the damaged bulb, you will have to turn it a quarter of a turn to the left. In order to put the new bulb, it is then necessary to turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Kia Pride

There are two main ways to access the indicators. It depends on the models, however accessibility can be done either outside or inside on this Kia Pride. Access from inside the engine : First of all, you will have to open your hood. And then, you will have to unscrew the cover with a screwdriver (often torx) in order to access the light block. Once the block is unscrewed, remove it and you can replace this bulb. Wheel arch access : Look under the wheel to see if the clips are there. If this is correct, it is necessary to remove the fixings and remove the screws with a screwdriver. Second, remove the light unit from your Kia Pride slowly from the front. Now just replace your bulb and reattach the block in reverse. Exceptionally, on certain cars it is conceivable to remove the block of lights from the outside. Nevertheless it is quite rare. If that's right, with a screwdriver you will have to remove the fasteners, gently release the light block and replace your defective bulb.

How to change the bulb of a rear indicator on a Kia Pride

There are also two main ways to access this turn signal bulb. It depends on the models, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Almost every time accessibility can be done from inside the trunk. Regarding the light blocks, there are screws and fasteners. Remove them and remove the block slowly. Then it will only be necessary to replace this defective bulb with the new one. And then repeat this operation in reverse. It also remains conceivable that accessibility can be from the outside or through the wheel arch. However, it is much less frequent. In all cases, it is necessary to use your screwdriver and remove, being careful, the entire headlight unit so as to replace your bulb. To put it in place, proceed to the opposite step.