Using working indicators remains a legal obligation. Think about it, omitting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are indulgent at times on this point. It therefore remains important to have indicators working properly. We will therefore see in this article how to replace the bulb of a flashing light of Kia Pro Cee D, front and rear. It is also likely that the malfunction comes from a short circuit, but it is rather rare.change-flashing-Kia-Pro-Cee-D

Kia Pro Cee D: things to know before replacing its indicator

Firstly, it is important to choose the right bulb model! In order not to be mistaken, it is advisable to go to a spare parts website or to a mechanic who will be able to order them for you. Then you have to think about selecting the right color for your bulb. Thereafter, you will need a tools very basic but still essential. You will therefore mainly need a screwdriver for a Kia Pro Cee D. A cruciform and torx kit and you will be able to do it. Generally, the bulbs are at bayonet . In order to dismantle the broken bulb, you will have to rotate it a quarter of a turn to the left. To fix the new bulb, you will therefore have to rotate a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Kia Pro Cee D

There are two different ways to access the flashing lights. It depends on the models, but access can be done either from the outside or from the inside for this Kia Pro Cee D. Access from inside the engine : First, you will have to open your hood. Then, it is necessary to loosen a cover with the help of a screwdriver (generally torx) in order to access the block of lights. Once the block is unclipped, remove it and do not hesitate to replace your bulb. Wheel arch access : Check underneath the wheel to see if the clips are there. When this is the case, you will need to remove the fasteners and remove the screws with a screwdriver. Then remove the light unit from this Kia Pro Cee D slowly from the front. Now you just have to replace the bulb and reattach the light unit following the reverse procedure. Less frequently, for some models it is likely to remove the block of lights from the outside. But it is rather rare. When this is the case, with the help of a screwdriver you will need to remove the fasteners, release the light block quietly and change the defective bulb.

How to change the bulb of a rear indicator on a Kia Pro Cee D

There are also two different ways to access this turn signal bulb. It may depend on the ranges but access can be done either from the inside or from the outside. Access from inside the trunk : Almost every time access can be done from inside the trunk. Regarding the headlight blocks, there are screws and fasteners. Remove them and remove the part slowly. Thereafter it is necessary to just change your defective bulb with the new one. Then repeat the same manipulation in reverse. It also remains likely that access is from the outside or under the wheel arch. But it is much rarer. Whatever happens, you will have to bring your screwdrivers and remove, paying careful attention to the whole block of lights so as to replace your bulb. To put it in place, perform the reverse manipulation.