Having working indicators remains a legal requirement. Remember, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some law enforcement officials are regularly sympathetic on this point. It is thus important to have indicators in good condition. We will therefore discover in this article how to change the bulb of a turn signal for a Kia Rocsta, front and rear. It is also possible that the concern comes from a false contact, however it remains quite rare.change-flashing-Kia-Rocsta

Kia Rocsta: things to know before changing your turn signal

To start with it is wiser to correctly choose your type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to your car repairer who can order them for you. Secondly, it is necessary to think about selecting the right color for the bulb. Then you will need to use a tools very simple but still essential. You will therefore need a screwdriver for a Kia Rocsta. A cruciform and torx kit and nothing can happen to you. Most of the time, the bulbs are at bayonet . So that you can dismantle the damaged bulb, you will have to turn it a quarter of a turn to the left. In order to install the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Kia Rocsta

There are two different ways to access the turn signals. Indeed, it depends on the models, however access can be done either from the outside or from the inside on this Kia Rocsta. Access from inside the engine : First, open your hood. And then, you will have to remove a cover with the help of a screwdriver (most often torx) in order to access the headlight unit. When the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Look under the wheel to see if the clips are there. In case this is the case, you will have to disassemble the fixings and remove the screws with a screwdriver. Then remove the headlight block from the Kia Rocsta gently from the front. All you have to do is change the bulb and reattach the block in the other direction. Less frequently, on some cars it is still possible to remove the headlight unit from the outside. However it is quite rare. In the event that this is the case, with the help of a screwdriver you will have to remove the fasteners, remove the headlight block quietly and change the burnt out bulb.

How to change the bulb of a rear indicator on a Kia Rocsta

There are also two different ways to access the turn signal bulb. It depends on the different types, however access can be done either from the inside or from the outside. Access from inside the trunk : Generally access can be done from the safe. At the light blocks, there are screws and fasteners. Remove them and gently lay the block down. Then you will only have to change your burnt out bulb with a new one. And then repeat this operation in reverse. It is also possible that access can be from the outside or through the wheel arch. However, it is much less frequent. In all cases, you will need to take your screwdrivers and carefully remove the entire block of lights in order to change your bulb. To reassemble, do the opposite.