Having working flashing lights is a legal requirement. Remember, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some law enforcement officials are complacent on this point at times. It is therefore necessary to have flashing lights that work properly. We will now find out how to replace the bulb of a turn signal for a Kia Sephia 2, front and rear. It is sometimes possible that the dysfunction comes from a false contact, but it is relatively exceptional.
Kia Sephia 2: things to know before replacing your turn signal
At first it is important to properly select your type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your car repairer who can select them. Secondly, you will have to think about choosing the right color for the bulb. Thereafter, you will need a tools extremely simple but nevertheless essential. You will therefore mainly need a screwdriver for a Kia Sephia 2. A set of cruciforms and torx and you will be able to do it. Almost every time, the bulbs are bayonet . In order to remove the damaged bulb, it must be rotated a quarter of a turn anti-clockwise. To fix the new bulb, you will then have to turn it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Kia Sephia 2
There are two main ways to access the flashing lights. It depends on the models, but access can be done either from the outside or from the inside on your Kia Sephia 2. Access from inside the engine : First of all, you will have to open the hood. And then, you will have to remove the cover with a screwdriver (usually torx) in order to access the light block. Now that the block is unclipped, remove it and do not hesitate to replace the bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. When this is happening, you will need to disassemble the fasteners and remove the screws using a screwdriver. Second remove the light block of this Kia Sephia 2 gently from the front. All you have to do is replace your bulb and put the unit back the other way. More rarely, on some models it is still possible to remove the light block from the outside. But it is relatively rare. When this is happening, with a screwdriver you will need to remove the fasteners, gently remove the light block and replace your defective bulb.
How to change the bulb of a rear indicator on a Kia Sephia 2
There are also two main ways to access the turn signal bulb. It depends on the models but access can be done either from the inside or from the outside. Access from inside the trunk : Most of the time access can be done from the trunk. For these headlight blocks, you will find screws and fasteners. Remove them and remove the block gently. Thereafter you will just have to replace the defective bulb with the new one. And then repeat the same manipulation in the other direction. It is also possible that access can be from the outside or under the wheel arch. But it is much rarer. Whatever happens, you will have to bring your screwdrivers and gently remove the entire block of lights so as to replace your bulb. To put it in place, carry out the opposite manipulation.