Using working indicators is mandatory. Remember, forgetting to put a flashing light is liable to 3 point on the permit as well as a fine . Although some law enforcement officers are sometimes forgiving about this. It thus remains necessary to have indicators which function correctly. We will therefore discover in this article how to change the bulb of a Kia Sephia indicator, at the front and rear. It is also likely that the problem comes from a short circuit, but it remains quite rare.change-flashing-Kia-Sephia

Kia Sephia: things to know before changing your turn signal

At first it is essential to properly buy the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a professional who can select them. In a second step you will have to think about choosing the right color for your bulb. Thereafter, you will need to use a tools extremely basic but still essential. You will therefore need a screwdriver for a Kia Sephia. A cruciform and torx kit and everything will be doable. Most of the time, the bulbs are at bayonet . In order to take out the damaged bulb, you will have to rotate it a quarter of a turn anticlockwise. In order to put the new bulb, it is necessary to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Kia Sephia

There are two different ways to access the flashing lights. It depends on the different models, but accessibility will be done either from the outside or from the inside on a Kia Sephia. Access from inside the engine : First, you have to open your hood. And then, you must remove a cover using a screwdriver (usually torx) to access the light block. As soon as the block is unscrewed, remove it and you can change this bulb. Wheel arch access : Look below the wheel to see if the clips are there. When this is happening, it is necessary to disassemble the hooks and remove the screws with a screwdriver. Then remove the Kia Sephia light block slowly from the front. All you have to do is change the bulb and position the light block in the other direction. Less frequently, on some cars it remains likely to replace the block of lights from the outside. Nevertheless it is quite rare. When this is happening, using a screwdriver you will need to remove the fixings, gently release the light block and change the defective bulb.

How to change the bulb of a rear indicator on a Kia Sephia

There are also two different ways to access the turn signal bulb. It depends on the range however the accessibility will be done either inside or outside. Access from inside the trunk : In most of the cases the accessibility will be done inside the trunk. For these light blocks, there are screws and fixings. Remove them and remove the block slowly. Then you simply have to replace this defective bulb with a new one. And then repeat this operation in the other direction. It also remains likely that accessibility is done from the outside or through the wheel arch. However, it is much less frequent. In all cases, it is necessary to bring your screwdrivers and remove, being careful, the entire headlight unit so as to change the bulb. To put it in place, carry out the opposite manipulation.