Having working indicators remains an obligation of the law. Remember, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if some police officers are occasionally sympathetic on this point. It is therefore important to have indicators in good condition. So we'll see below how to change the bulb of a Kia Venga turn signal, front and rear. It is also likely that the dysfunction comes from a false contact, however it is rather exceptional.
Kia Venga: things to know before changing your turn signal
To start with it is wiser to correctly buy the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a mechanic who knows how to select them. Then you will have to think about choosing the right color for the bulb. Then you will need to use a tools extremely simple but still necessary. You will therefore need a screwdriver for a Kia Venga. A game of cruciform and torx and everything will be doable. In most cases, the bulbs are at bayonet . In order to dismantle the broken bulb, it will be necessary to rotate the bulb a quarter of a turn anticlockwise. So as to install the new bulb, it must then rotate a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Kia Venga
There are two main ways to access the turn signals. It depends on the models, however accessibility can be done either from the outside or from the inside for a Kia Venga. Access from inside the engine : To start, you will need to open the hood. Then, you will have to unscrew the cover with a screwdriver (most often torx) in order to access the headlight unit. Now that the block is unclipped, remove it and you can change this bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If this is the case, you must undo the fasteners and remove the screws with a screwdriver. Then remove the headlight assembly from your Kia Venga gently from the front. You simply need to change the bulb and put the block in the opposite direction. Exceptionally, for some models it remains likely to remove the headlight unit from the outside. Nevertheless it is rather rare. If this is the case, with a screwdriver you will have to remove the fixings, remove the headlight unit slowly and change the burnt out bulb.
How to change the bulb of a rear indicator on a Kia Venga
There are also two main ways to access your turn signal bulb. It depends on the range, however accessibility can be done either from the inside or the outside. Access from inside the trunk : Frequently accessibility can be done from inside the trunk. At the headlight blocks, there are screws and fixings. Take them off and take the piece off, being careful. Then you just have to change this burnt out bulb with the new one. Then repeat the same manipulation in the other direction. It is also likely that accessibility is done from the outside or through the wheel arch. However, it is much less frequent. Whatever happens, you must use your screwdriver and carefully remove the entire headlight unit in order to change the bulb. To put it in place, carry out the opposite manipulation.