Using flashing lights which are in good condition remains compulsory. Think about it, forgetting to put a turn signal is punishable by 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are regularly lenient on this point. It is therefore essential to have flashing lights in good condition. We will see with this article how to replace the bulb of a Kiaage 3 indicator, at the front and the rear. It is sometimes possible that the dysfunction comes from a bad contact, however this remains quite exceptional.change-flashing-Kiaage-3

Kiaage 3: things to know before replacing your indicator

Above all, it is essential to correctly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your mechanic who can select them. Then you will have to think about selecting the right color for the bulb. Finally, you will need to use a tools extremely basic but still necessary. So you will mainly need a screwdriver for a Kiaage 3. A cruciform and torx kit and everything will be doable. Most of the time, the bulbs are bayonet . In order to remove the damaged bulb, you will have to turn it a quarter of a turn to the left. In order to fit the new bulb, it is necessary to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Kiaage 3

There are two different solutions to access the turn signals. Indeed, it depends on the model, however access can be done either from the outside or from the inside for this Kiaage 3. Access from inside the engine : First, you will have to open the cover. Then, you must unscrew a cover with a screwdriver (often torx) in order to access the light unit. Now that the block is unclipped, remove it and do not hesitate to replace your bulb. Wheel arch access : Look under the wheel to see if the fasteners are in this location. When this is the case, it is necessary to disassemble the hooks and remove the screws with the help of your screwdriver. Then remove the light unit from the Kiaage 3 gently from the front. All you have to do is replace your bulb and position the block in the opposite direction. Less frequently, for some cars it is possible to remove the light unit from the outside. However, it is quite rare. When this is the case, with a screwdriver you will have to remove the fasteners, remove the light assembly gently and replace your burnt out bulb.

How to change the bulb of a rear indicator on a Kiaage 3

There are also two different solutions for accessing the turn signal bulb. It may depend on the models but the access can be done either from inside or from outside. Access from inside the trunk : Frequently access can be done from inside the safe. Regarding the headlight blocks, there are screws and fasteners. Remove them and remove the block gently. Finally, you only have to replace your burnt out bulb with a new one. Then repeat the same manipulation in the other direction. It is also possible that the access can be from the outside or under the wheel arch. However, it is much less frequent. Whatever happens, it is necessary to bring your screwdrivers and gently remove the entire headlamp assembly in order to replace this bulb. To reassemble it, do the reverse manipulation.