Using working indicators remains a legal obligation. As a reminder, forgetting to put a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Although some law enforcement officers are sometimes complacent on this point. It is therefore important to have turn signals in good working order. We will therefore discover with this article how to change the bulb of a turn signal light for a Kiaage, front and rear. It is also possible that the concern arose from a false contact, nevertheless it remains rather exceptional.change-flashing-Kiaage

Kiaage: things to know before changing your indicator

Above all, it is essential to properly choose the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a mechanic who knows how to select them. Secondly, you will have to be careful to choose the right color for your bulb. Finally, you will need a tools extremely simple but nevertheless essential. You will therefore need a screwdriver for a Kiaage. A set of cruciforms and torxes and nothing can happen to you. Almost every time, the bulbs are bayonet . In order to take out the faulty bulb you will have to rotate it a quarter of a turn counterclockwise. In order to fix the new bulb, you will have to rotate it a quarter of a turn in the other direction.

How to change the bulb of a front turn signal on a Kiaage

There are two different ways to access the flashing lights. Indeed, it depends on the model, nevertheless the access will be done either from the outside or from the inside on your Kiaage. Access from inside the engine : First of all, you have to open your hood. Then, you have to remove the cover with the help of a screwdriver (regularly torx) to access the headlight unit. When the block is unscrewed, remove it and you can change this bulb. Wheel arch access : Look under the wheel to see if the fasteners are in this location. In case this is what happens, you will have to disassemble the hooks and remove the screws using a screwdriver. Secondly, remove the headlight unit of this Kiaage gently from the front. You simply need to change the bulb and replace the block by following the reverse procedure. Less frequently, on some cars it is possible to replace the headlight unit with the exterior. But it is rather rare. In case this is what happens, with the help of a screwdriver you will have to disassemble the fasteners, remove the headlight assembly slowly and change the burnt out bulb.

How to change the bulb of a rear indicator on a Kiaage

There are also two different ways to access your turn signal bulb. This may depend on the models but access will be either from the inside or from the outside. Access from inside the trunk : Most of the time, access will be from inside the safe. At the level of the light blocks, there are screws and fasteners. Remove them and remove the block slowly. Finally, you just have to change this burnt out bulb with a new one. Then repeat this operation in the other direction. It is also possible for access to be from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will need to use your screwdrivers and gently remove the entire light assembly in order to change your bulb. To reassemble it, perform the reverse process.