Using working indicators remains mandatory. As a reminder, not putting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some law enforcement officials are sometimes lenient on this point. It therefore remains important to have indicators that work properly. We will therefore discover in this article how to change the bulb of a turn signal for a Lancia Aurelia, at the front and rear. It is also conceivable that the concern comes from a short circuit, but it remains quite exceptional.
Lancia Aurelia: things to know before changing your turn signal
Firstly it is important to properly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a professional who can select them. Then you have to be careful to select the right color for your bulb. Then you will need to use a tools super simple but still essential. You will therefore need a screwdriver for a Lancia Aurelia. A cruciform and torx game and nothing can happen to you. Almost every time, the bulbs are bayonet . In order to dismantle the damaged bulb, it will have to be rotated by a quarter of a turn anticlockwise. To put the new bulb, it will therefore be necessary to rotate a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Lancia Aurelia
There are two different solutions for achieving the turn signals. It depends on the different models, but access can be done either from the outside or from the inside on a Lancia Aurelia. Access from inside the engine : First, you will need to open the hood. Then, it will be necessary to loosen a cover with the help of a screwdriver (usually torx) to access the headlight unit. When the block is unscrewed, remove it and do not hesitate to change the bulb. Wheel arch access : Look below the wheel to see if the clips are there. In this case, you will have to remove the hooks and remove the screws with the help of your screwdriver. Then remove the headlight block from your Lancia Aurelia gently from the front. You just need to change the bulb and position the block in the opposite direction. More rarely, on some cars it is conceivable to remove the headlight unit from the outside. Nevertheless it is quite rare. If this is the case, with the help of a screwdriver, you will have to disassemble the fasteners, remove the headlight unit quietly and change the burnt out bulb.
How to change the bulb of a rear indicator on a Lancia Aurelia
There are also two different solutions for accessing this turn signal bulb. It depends on the range, however access can be done either from inside or outside. Access from inside the trunk : Almost every time access can be done from the trunk. At the light blocks, you will find screws and fasteners. Take them off and take the piece out slowly. Then you just have to change the burnt out bulb with a new one. Then repeat this operation in reverse. It is also conceivable that access can be from the outside or through the wheel arch. However, it is much less frequent. In all cases, you will need to take your screwdriver and remove, paying attention to the entire headlight unit in order to change this bulb. To put it in place, proceed to the opposite manipulation.