Using working indicators remains a legal obligation. Remember, not putting a flashing light is punishable by 3 point on the permit as well as a fine . Although some law enforcement officials are regularly sympathetic on this point. It therefore remains essential to have indicators in good condition. We will therefore see in this article how to replace the bulb of a Lancia Beta Spyder indicator, front and rear. It is also possible that the malfunction is due to a short circuit, however it is quite exceptional.
Lancia Beta Spyder: things to know before replacing your turn signal
At first it is wiser to correctly choose your type of bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your garage which can select them. In the second place it will be necessary to think of selecting the right color of the bulb. Then you will need a tools very basic but still essential. You will therefore mainly need a screwdriver for a Lancia Beta Spyder. A cruciform and torx game and nothing can happen to you. Almost every time, the bulbs are bayonet . To remove the damaged bulb you will have to rotate the bulb a quarter of a turn to the left. In order to install the new bulb, you will have to rotate it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Lancia Beta Spyder
There are two main ways to access the turn signals. It depends on the models, however access can be done either from the outside or from the inside for a Lancia Beta Spyder. Access from inside the engine : First of all, you will have to open your hood. Then, it is necessary to unscrew a cover with the help of a screwdriver (most often torx) in order to access the headlight unit. Once the unit is unclipped, remove it and you can replace this bulb. Wheel arch access : Inspect underneath the wheel to see if the clips are there. If this ever happens, you will need to remove the fasteners and remove the screws with a screwdriver. Second, remove the headlight unit from this Lancia Beta Spyder slowly from the front. All you have to do is replace the bulb and reattach the block in reverse. More rarely, for some cars it is possible to remove the headlight unit from the outside. But it is quite rare. If this is what happens, with the help of a screwdriver you will have to disassemble the fasteners, remove the headlight block quietly and change the faulty bulb.
How to change the bulb of a rear indicator on a Lancia Beta Spyder
There are also two main ways to access your turn signal bulb. It depends on the different types, however access can be done either from the inside or from the outside. Access from inside the trunk : Frequently access can be done from inside the trunk. For these headlight blocks, there are screws and fasteners. Remove them and remove the block, being careful. Then it is necessary to just replace this faulty bulb with a new one. Then repeat this operation in reverse. It also remains possible that access is from the outside or through the wheel arch. But it is much less frequent. Whatever happens, you will need to take your screwdrivers and gently remove the entire headlight assembly in order to replace this bulb. To reassemble, do the opposite manipulation.