Having flashing lights which are in good condition remains compulsory. Remember, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a fine . Although some police are sometimes complacent about this. It is therefore essential to have flashing lights in good working order. We will therefore see in this article how to change the bulb of a flashing light of a Lancia Compact Mpv, front and rear. It is sometimes possible that the malfunction comes from a short circuit, however it is quite rare.change-flashing-Lancia-Compact-Mpv

Lancia Compact Mpv: things to know before changing your turn signal

Firstly it is important to properly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to an auto repairer who can select them. Then you have to think about selecting the right color for the bulb. Finally, you will need to use a tools very basic but nevertheless essential. You will therefore need a screwdriver for a Lancia Compact Mpv. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . In order to remove the faulty bulb it will be necessary to turn the bulb a quarter of a turn to the left. In order to fix the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Lancia Compact Mpv

There are two different ways to access the indicators. It depends on the models, however access can be done either from the outside or from the inside on this Lancia Compact Mpv. Access from inside the engine : To start, you will have to open your hood. Then, you must unscrew the cover using a screwdriver (often torx) to access the light block. When the unit is unclipped, remove it and it is possible to change your bulb. Wheel arch access : Check under the wheel to see if the fixings are there. When this is happening, you will have to remove the hooks and remove the screws with the help of your screwdriver. Then remove the light block from the Lancia Compact Mpv slowly from the front. You simply have to change your bulb and reattach the block by following the reverse procedure. Less frequently, on some cars it is possible to remove the light block from the outside. Nevertheless it is quite rare. When this is happening, using a screwdriver you will have to disassemble the fixings, release the block of lights quietly and replace your burnt out bulb.

How to change the bulb of a rear indicator on a Lancia Compact Mpv

There are also two different ways to access your turn signal bulb. It can depend on the models, however access can be done either from inside or outside. Access from inside the trunk : Frequently access can be done from the trunk. For these light blocks, there are screws and fixings. Remove them and lay the block down slowly. Finally you only need to replace your burnt out bulb with the new one. Then repeat the same manipulation in reverse. It is also possible that access can be from the outside or under the wheel arch. However, it is much less frequent. Whatever happens, you will have to take your screwdriver and gently remove the entire headlight assembly in order to change the bulb. To put it in place, perform the reverse manipulation.