Having working flashing lights is mandatory. As a reminder, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if certain police officers are sometimes lenient on this point. It is therefore necessary to have flashing lights in good working order. We will now see how to change the bulb of a indicator of a Lancia Delta 2 Hf, front and rear. It is also likely that the problem comes from a false contact, however it remains quite exceptional.change-flashing-Lancia-Delta-2-Hf

Lancia Delta 2 Hf: things to know before changing your turn signal

At first it is wiser to correctly buy your type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a mechanic who can select them. Secondly, it is necessary to be careful to choose the right color for the bulb. Thereafter, you will need to use a tools very basic but nevertheless necessary. You will therefore need a screwdriver for a Lancia Delta 2 Hf. A game of cruciform and torx and you will be able to do it. Generally, the bulbs are at bayonet . In order to dismantle the defective bulb you will have to rotate the bulb a quarter of a turn to the left. To install the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Lancia Delta 2 Hf

There are two main solutions for accessing the flashing lights. Indeed, it depends on the different models, however accessibility can be done either from the outside or from the inside for this Lancia Delta 2 Hf. Access from inside the engine : To start, you will need to open the hood. Then, you must unscrew the cover with a screwdriver (regularly torx) to access the light block. As soon as the block is unclipped, remove it and do not hesitate to change the bulb. Wheel arch access : Check below the wheel to see if the clips are there. When this is the case, you will have to undo the hooks and remove the screws using a screwdriver. Secondly remove the light block of your Lancia Delta 2 Hf gently from the front. It is now enough to change the bulb and put the block in the other direction. Exceptionally, for certain cars it is likely to replace the block of lights from the outside. But it is quite rare. When this is the case, with a screwdriver you will have to remove the clips, remove the light block quietly and replace the faulty bulb.

How to change the bulb of a rear indicator on a Lancia Delta 2 Hf

We can also find two main solutions to access your turn signal bulb. It can depend on the models but accessibility can be done either from the inside or from the outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. For these headlight blocks, there are screws and fasteners. Remove them and drop the block slowly. Then you simply have to replace the faulty bulb with a new one. Then repeat the same manipulation in reverse. It is also likely that accessibility is done from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will have to use your screwdriver and remove the entire block of lights, taking care to change your bulb. To reassemble, take the opposite step.