Using working indicators remains mandatory. As a reminder, not putting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are sometimes complacent about this. It is therefore essential to have indicators in good condition. We will therefore see below how to change the bulb of a flashing light of a Lancia Delta, front and rear. It is also conceivable that the concern comes from a false contact, however it is rather exceptional.
Lancia Delta: things to know before changing your turn signal
Above all it is important to properly buy the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a car repairer who can select them. Then you have to think about selecting the right color of the bulb. Finally, you will need a tools extremely simple but still necessary. You will therefore mainly need a screwdriver for a Lancia Delta. A game of cruciform and torx and everything will be doable. In most cases, the bulbs are at bayonet . In order to remove the broken bulb, you will need to turn the bulb a quarter of a turn counterclockwise. In order to put the new bulb, it will therefore be necessary to turn a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Lancia Delta
There are two different solutions to access the indicators. It depends on the different models, however the accessibility will be either from the outside or from the inside on this Lancia Delta. Access from inside the engine : First, you are going to have to open your hood. Then, you will have to remove the cover using a screwdriver (regularly torx) to access the light block. When the unit is unclipped, remove it and it is possible to change the bulb. Wheel arch access : Check below the wheel to see if the fixings are there. If this is the case, you will have to disassemble the hooks and remove the screws with the help of your screwdriver. Then remove the light block of your Lancia Delta gently from the front. You simply need to change your bulb and position the block in the opposite direction. Less frequently, on some models it is conceivable to remove the block of lights from the outside. Nevertheless it is rather rare. In the event that this is the case, using a screwdriver you will have to remove the fasteners, gently remove the light block and change your faulty bulb.
How to change the bulb of a rear indicator on a Lancia Delta
There are also two different solutions for accessing this turn signal bulb. It depends on the range, however accessibility will be either from the inside or from the outside. Access from inside the trunk : Most of the time accessibility will be through the interior of the trunk. At the headlight blocks, you will find screws and fasteners. Remove them and gently remove the block. Finally you will simply have to replace the faulty bulb with a new one. Then repeat the same manipulation in reverse. It is also conceivable that accessibility can be from the outside or through the wheel arch. However, it is much rarer. In all cases, you will need to use your screwdriver and remove the entire block of lights, being careful so as to change this bulb. To reassemble, carry out the reverse procedure.