Using working indicators is mandatory. As a reminder, not putting a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if some police officers are sympathetic to the matter from time to time. It therefore remains essential to have indicators in good condition. We will now see how to replace the bulb of a flashing light on a Mazda Sassou, front and rear. It is also conceivable that the concern comes from a false contact, however it remains quite rare.change-flashing-Mazda-Sassou

Mazda Sassou: things to know before replacing your indicator

Firstly, it is essential to choose the right type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a professional who can select them. Then it is necessary to think about selecting the right color for the bulb. Finally, you will need a tools extremely basic but still essential. You will need a screwdriver for a Mazda Sassou. A game of cruciform and torx and you will be able to do it. In most cases, the bulbs are at bayonet . To dismantle the defective bulb, it will have to be rotated a quarter of a turn anticlockwise. In order to install the new bulb, it is then necessary to turn it a quarter turn in the opposite direction.

How to change the bulb of a front indicator on a Mazda Sassou

There are two different solutions for accessing the flashing lights. It depends on the different models, however access can be done either from the outside or from the inside for a Mazda Sassou. Access from inside the engine : First of all, you have to open the hood. And then, it is necessary to remove the cover with a screwdriver (frequently torx) in order to access the block of lights. When the unit is unclipped, remove it and do not hesitate to replace the bulb. Wheel arch access : Check under the wheel to see if the fasteners are there. If ever this is the case, it is necessary to remove the fasteners and remove the screws with the help of your screwdriver. Then remove the light block from the Mazda Sassou gently from the front. It is now enough to replace the bulb and position the light block following the reverse procedure. Exceptionally, for some cars it is conceivable to replace the light block from the outside. However it is quite rare. If ever this is the case, with a screwdriver you will have to remove the fixings, release the light block quietly and replace the burnt out bulb.

How to change the bulb of a rear indicator on a Mazda Sassou

There are also two different solutions for accessing the turn signal bulb. It can depend on the ranges, however access can be done either from inside or outside. Access from inside the trunk : In most of the cases the access can be done from the safe. At the headlight blocks, there are screws and fasteners. Remove them and remove the part, being careful. To finish it is necessary to simply replace the burnt out bulb with a new one. And then repeat this operation in reverse. It also remains conceivable that access can be from the outside or under the wheel arch. However, it is much rarer. In all cases, it is necessary to use your screwdriver and gently remove the entire headlight unit in order to replace your bulb. To reassemble, reverse the process.